Meteor BlastPivoting Coupler, 120 Degree with 5 Angles, heavy duty design and Stainless Steel Safety Lock for Pressure Washer Spray Nozzle, Clean Hard to Reach Area, 5000PSI, 1/4” Quick Connect

Why did you pick this product vs others?:Well built with a useful design and no leaks.

This is perfect for pressure washing under my Zero Turn Mower deck.Even after raising the mower with a Mojack it was difficult to get it clean.This little gizmo cures that problem!

This is an update to my original review which is below. I recived four emails from tools pro saying they have been trying to get ahold of me but could not for some reason. They sent me a new upgraded pivot coupler together with a 6 in 1 head. They also refunded my original purchase. So I updated my overall review to 4 stars because They made a large effort to make things right.Original reviewThis broke the second time I used it, about four months after I puchased it. The pin that holds it at the angle you set sheared off. You can see the pin in the picture. I was surprised to see the pin was made of brass. Brass is a soft metal, this type of pin should be made of a harder metal.I tried to contact the seller, Tools Pro, three times with no response.In the description they write " We promise to reply your message within 10 hours...All of our products come with full warranty that against quality defective for 12 months from date of purchase on Amazon".Tool Pro never answered my emails and they never honored the 12 month warranty. Obviously I am disapointed. I see where others have had the same failure.120 degree angle is misleading. You can go 30 or 60 up, as well as 30 or 60 down. for a total of 120 degrees of swing. However, you cannot have the water come out at a 120 degree angle for cleaning gutters and such. If the water came out at 120 degrees the water would be coming back towards you rather than away from you, towards you would be good for cleaning gutters from the ground.

Excelent quality

Really sturdy. The O rings will need to be changed, especially if you use it with hot water. There is a valve filter screw that can be removed to be cleaned if it clogs with a flathead screwdriver. This valve doesn't need to be in there but psi is greater with it and it keeps debris from entering your turbo nozzle, or whatever you're using. However this filter will need to be cleaned often if you opt to leave it in.

I was anxious to use this pivoting adapter to finish washing my shed roof. Everything looked good to start with but when I was ready to use it, the locking pin was missing; it had fallen out in the grass never to be seen again. I put a small clamp on it to secure the swivel in place at the desired position but water would not pass through the nozzle. I took out the screen (actually the screen is a great idea) and found it completely blinded over by the previous owner! Uhhh, it was listed as new and clearly it was not. Well, that ruined my afternoon plans. Come-on guys, you can and should do better.UPDATE:This seller did do better. Mistakes do happen and sometimes there is a business that will do the right thing. After my initial review, I received an apology and an explanation of what might have happened. He offered to "make it right", I accepted and he followed through. This is the reason for the update. I would have no qualms in dealing with him in the future..Scott

It's a very helpful tool when you are washing a house or anything.

This nozzle adapter works as intended and includes a set of spare o-rings for rebuilding it in the future. The quick connect fittings are stainless steel as is the locking pin so it should be very durable.Not sure what value the sewing thread ripper that was included is. I threw it out. Not really that more useful than any other pick for getting the old o-rings out, but it's there if you need it.I would buy it again.