TerraBloom CO2 Keg Pressure Regulator for Draft Beer Kegerators. Dual Gauge Heavy Duty Unit with CGA-320 inlet, 0-50 PSI Working Pressure, 0-3000 PSI Tank Pressure with Safety Pressure Relief Valve

I had the CO2PO double body that came with my keg system, and they are JUNK!! They won't hold constant pressure, and my blow out valve stripped out after tripping in less than six months.So, I bought this one, and so far, very impressed. It's built very solid, seals easy, and actually holds the fricking pressure you set it to! You'd set the CO2PO, and as soon as you opened your valve, pressure would drop. Not so with this unit, I set it at 10 PSI, and it's been rock solid for a week now. It is true, the knobs are VERY hard to turn, but they are extremely solid, and they hold where you want them, so small price to pay. They even have lock nuts, so you can lock in your setting. I'd prefer if the keg connection piece was a few inches shorter, as it's almost 14 inches total, keg to end of regulator. Not a big deal, but in a small space, makes a difference.

This is a well made, heavy duty regulator. Once it was dialed in to the desired pressures for each of the two systems, it's held the pressures reliably. As some have mentioned, the adjustment dials are hard to turn by hand, but you can do it or just get a wrench to turn them. I actually prefer it this way because it is easier to make a fine adjustment. Overall, quite pleased with this purchase.

Fits standard 5 pound CO2 bottles typically used for brewing / homemade kegerators and Keezers (converted deep chest freezers). Barb is 5/16" fits standard red gas lines to port out to tap handle/spiles. Easy to set up and use, seems durable and well made ~3 months into use.

After many good years with my Victor regulator it finally died and I needed a replacement. My welding these days is very little compared to years prior so I got sticker shock looking a gauges. I ordered this set with little expectations and was I wrong. They work a described, I used them this past weekend and they did the job. I would definitely recommend them.

I had mid-low expectations due to the low price of this flow meter. Heck harbor freight wants 90 bucks! This flow meter exceeded my expectations in build quality, machining, etc. I have no way to measure its accuracy.

I had to change the tank connection piping from my old regulator to this one because the flare on the end was too thick and wouldn't seal in my tank. It wasn't a big issue for me but if I had been starting without another regulator I would not have been able to make it work. I don't know if the flare size is different on new tanks vs older tanks (mine is old) or if it is a manufacturing defect. Either way for the price I am satisfied with this product.

The regulator was impossible to use. It came with the valves so tight they were impossible to turn. My faucet wrench broke trying to loosen it, and I cut myself in the process. It was miserable. After about an hour and three wrenches I was able to loosen the valve. When I finally got it loose, it got stuck in the open position. Overall, this has been a terrible experience. I have worked with many regulators in the past, and I know how they should work. I am so angry with this purchase.

Not only did this unit leak there was no hole in the nipple to let gas flow. I spent hours trying to fix what I thought was a broken MIG welder only to realize I bought a POS regulator. Who would of thought to check if there was a hole in the gas line fitting. Really???????