Manso New 2.0T 2.0 T Turbo Metal Trunk Emblem Badge Decal Sticker fit for Audi Ford Hyundai

Is exactly what I thought it would be. If I had to be picky the only thing wrong with this item is that the back of it is Hollow. Makes for mounting to vehicle a little more difficult but definitely achievable. Just have to make sure that adhesive is stuck well around edges on back.

Nice emblem.

Brag on that Ford twin scroll 250 HP engine!I like that the T is separate and you can decide how you want to add it on your car.

It's a great looking emblem, but like so many other reviews state, the back is hollow which provides only about 1 mm of contact surface with the adhesive around the peripheral of the emblem. I just put it on yesterday, I'll be surprised if the T doesn't fall off in the next few days. Too late now because I don't have any more double backed adhesive, but I would suggest that one fill in The back of the emblem with a non-expanding epoxy like JB Weld to provide a surface for the adhesive. Use a two-part chemically curing adhesive then once you have it level, spray wax paper with some cooking oil and then turn the emblem upside down as if you were sticking it to your car so the epoxy will be smooth and level with the emblem when it cures. Place something heavy on the emblem to make sure the adhesive doesn't seep out, because if you have to do any sanding you might break the chrome and cause it to chip off. Unless you have a white or light colored car I would suggest you take a sharpie black marker and color the edge of the adhesive before sticking it on, the white adhesive showing around the emblem looks kind of crappy on a black car.Update: well, I was almost right, the T didn't fall off like I thought it would, but the first trip to the car wash the red sticker in the T came out. I ordered some decal tape and reapplied the entire emblem. Works pretty good if you cut a few strips to build up the inside of the emblem before cutting the outline. The stuff I ordered was about one and a half inches wide or more, I was able to just lay the decal on it- make sure it's stuck good, then cut around everything with an X-Acto knife and it worked pretty good.

Looks great and easy to stick on.....Just make sure you pencil line with a level for a good balance..

Great product! Fast delivery.

Tough to line up right.

The back of badge is hollow and adhesive sinks all the way into and below edge of badge. Get what you pay for