PIT66 Fender Flares, Fit 07-13 Chevy Silverado 1500/2014 Silverado 2500HD 3500HD Fleetside New Body 78.0" / 97.6" Long Bed Length only (NOT fit Stepside/Dually Models/Factory Mud Flaps/GMC Sierra)

I was skeptical initially because of the low price. However to my pleasant surprise they fit and look fantastic. I’m very impressed and would recommend to anyone.

Works,great looks great on truck

When installing the front fender flares they go on easier than the rear. The front flares I just unscrewed the wheel housing screws and used them again to fasten the new flares. I used the edge trim on the front flares, but skipped it on the rears because it wasn't easy to put on. In the rear I fastened the flare down low on the rear 1st and then worked my way up around to the lower front wheel housing sheet metal. I used 1 1/4" rounded phillips bolts. I used some of the flare bolt holes where I thought aligned well, but drilled other holes where I thought they would better hold on the metal wheel well better. At the bottom of both sides of the flare panel where they wrap under the truck I drilled and bolted them tight up under the truck body where they can't be seen. I was real happy with the width of the fender flares. My paint was blistering 2" and the flares were at least twice that wide and more than covered the bad areas. I didn't use any of the hardware that came with the flares including the edge trim tool.

Fender flair fit just like they said. If I need to get them again I will definitely buy them again. Very good product and perfect fit.

Flares seem too narrow; they are not as wide as the fender opening. When mounting, flares tend to twist/ not stay flush. Also, driver rear flare does not have cut out for gas door. They were more difficult to install due to the quality. I would recommend finding different flares. Installed on a 2011. Would have requested a return/refund but after installing the first two and having to modify, it wasn’t worth taking them back off and going through the process to return. They will just have to work for now but I recommend looking for something different if you have a 2011.

Perfect fit for my 2013 chevy silverado. Easy install

It says they would fit a 2011 GMC Sierra, but they don’t. They seem to be smaller than expected. I had to use longer screws just to make them work.

These are exactly as OEM, fit perfectly. Best advice though is use a hair dryer to make installation easier