EVGA DG-73 Matte Black Mid-Tower, Acrylic Window, Gaming Case 130-P0-0020-KR

Actually bought this case for a computer that I was building as a Christmas present for my cousin... When I finally got a chance to go over there to build it, I ended up taking the parts out of my computer and giving him my old case (which I think may actually have better ventilation) so that I could keep this one. Very sleek, with a well-placed window that allows you to easily see the components. The front panel removes to reveal a dust filter, with air coming in around the sides of the panel to pass through said filter. The only complaint I can give about the case is that it seems to be louder than my old one and doesn't have as much space for drives (although they very cleverly mount against the side of the case, taking up much less space than usual. And you can still have 2 3.5" and 2 2.5" drives)NOTE: When installing the power supply, there is a bracket included which attaches to the PSU, and then the PSU slides through the hole in the back of the case.... I was confused by this for about an hour before finally calling EVGA and feeling like an idiot.

One of the most beautiful tempered glass case I've seen and worked on. Both the glass, shrouds, and chassis are all top class material. Plenty of room is the back and the power supply shroud for easy cable management. There is , however, the problem with the frontal air intake. Which I've experienced before on few other tempered glass cases as well. All I had to do was add 2 more intake fans on top. 240mm or 280mm AIO would easily fit in front. Although, I would recommend a push and pull configuration rather than just one sided. Overall, I enjoyed building in this case and I've ordered another one, this time a DG-75 for my I5-8600k build coming up. Always a pleasure dealing with EVGA products and their customer service. Best in this industry.

Pros:1. Case looks good.2. PCIe screws are on the outside so you don't drop them inside your computer.3. Glass side panels4. Dust filtersCons:1. Cable management is very bad and I can personally barely get the back panel on with a bunch of cables not running through the back2. The bottom dust filter is cheap and a pain to take off and clean3. You get 2 SSD and 2 HDD spots which both have barely any room. (I barely got my 90 degree SATA connector to connect to my HDD while it's pushing it well off the case.)4. The screw build quality is very bad as well. Some screws barely go in and require you to essentially use brute force to get them in.Neutral:1. My Hyper 212 Evo makes the glass side panel slightly warm.2. Got it for $60.Overall:Even if it went on sale again for $60 I likely wouldn't get it again. This case is looks over functionality every day. You can easily at it's normal selling price find something significantly better honestly.

My first thoughts upon receiving it was its quite a sturdy case. It does feel a lot better then some other budget cases (like Corsair Carbide budget cases).Airflow isn't bad if you are smart enough to use your head. It came with a lot of motherboard spacers/stands. I realized they were the same threading as the screws in the front panel and just put the spacers first then the acrylic panel and then the panel screws. You get about an extra half inch clearance of air gap. Put three cheap RGB fans behind the front panel and you have a very classy case. I picked mines up during a sale for $34.99 so it was really great for the money. Definitely an underappreciated case because of its front panel lack of initial cooling. But it really isnt that hard to solve it initial problems and if you are okay with half windows on the side panels, this one is your case. My decal was separate in the box so i opted to not put the decal on. Also love the hard drive and ssd bays in the wire management side panel. Makes the whole build look a lot cleaner and simple to install.

The case is pretty attractive and easy to assemble with a couple of minor quirks, but no worse than any other case I've purchased in the past (solid 4.5 stars). The problem arises when trying to obtain the software for the RGB lighting.You can't just got the the EVGA website and download the needed software. No! You have to register first and give your address, phone number, date and place of purchase AND the serial number (which happens to be on the bottom of the case--a minor inconvenience if you are using the same computer for registration). It gets better. The when you finally think you can get your software, you will get one (and if recall correctly a click or two later another one) nag screen peddling various extended warranties.So finally you install the software but the thing is pretty buggy! Sometimes it takes a couple of tries to start it. Once in a while it will ask me to close programs that are already running. Worst of all when I reboot it tends to lose all the RGB settings and I have to start over.I'm keeping the case since the computer is already set up but the RGB lights will remain default white: I deleted their junky software.

Eu en rabais et pour 100$. Bon case avec beaucoup d'options et entièrement démontable. Un peu de manque pour le filage, si vous utilisez plusieurs SSD et HDD. La tour vient d'ailleurs avec 4 supports intégrés (2de ch.). Assez d'espace pour un bon petit montage pour une mid-tower. Les leds fonctionnent très bien, mais... vaux mieux se rabattre sur un autre programme que celui de proposé par Evga. Pour ce qui est du matériel, je suis heureux d'avoir obté pour le modèle 76. Celui-ci à un panneau rigide côté hdd etc... Ma préférence au delà du modèle 77! De plus, ce sont des vitres trempées. Un peu de manipulation douce est de mise. J'ai ajouté des écrous en silicone entre les vitres et la tour afin d'ajouter un peu de ventilation supplémentaire. De plus, la vitre de devant est obtionelle. Pour ceux qui voudraient plus de ventilation, suffit de lanretirer. Pour ma part, j'ai mis 7 fans et ça roule nickel! La tour viens avec 3 fan non pwm de 120mm. Pensez à changer cela! Un peu décevant pour un tour qui est quand même assez récente. Bref... Pour 100$ c'est un bonne option mais au delà, un peu abusé considérant le.manque de fans pwm et d'un espace assez restreint au dos.

Got it through a warehouse deal and I'm very happy with it. The quality is good and the look of this bad boy once assembled is impressive. Cable management is fairly easy and it's big enough for many fans. I've installed a big CPU fan and I still have plenty of space.

El producto me parece tiene buena ventilación (aunque tengo que quitar la parte frontal de cristal cuando hay carga de cpu al 100%) , podría mejorar en algunos detalles para una ventilación mas plena, pero es amplio y cómodo, lo único malo que no me gusto fue que no trae orificio para pasar cable de corriente por un lado hay que maniobrar en el espacio que queda entre mother y gabinete donde esta el espacio para discos, pero en general cómodo, estaba entre este y el corsair blanco, pero al final quede conforme con este. Actualmente lo tengo con un 1950x y un noctua nh u14s y entra perfectamente.

I was a bit concerned about airflow, it gets very little through the front but with my build nice and tidy, 9700k @ 5.0 and a 2080 going full tilt in there, it keeps cool and looks nice. No regrets here.

Love it