Adhesive Handgun Holster Organizer Gun Safe, Car, Desk, Carpet-Firearm Protection w Nylon Padded Interior, Full Size, 9mm

These things are absolutely Perfect! They attach to carpet like glue and I bought a 3 pack to hold my pistols on the door of my Bighorn 19ECB Safe. I plan on getting another 3 pack soon so I have the 4th for my revolver on the safe door and I will be using the other two to attach them to the inside part of our bedroom nightstands (between the bed and nightstand) so we have fast and easy access to our HD firearms.These are fully loaded M&P9, PPQ and Shield in the holster (which with the gun and ammo is as heavy as it gets right) and they seem to be holding just fine. Now mind you I am writing this review the day I got them ... if they do not work or hold up I Will for sure update ... os if you see no update they are working Perfect!!!Coems with the Hook Velcro strip already sewn intot he holster and then a piece of hook velcro as well that can be stuck to anything so you can adhere the holster to it which is great and will be great for the nightstands int he bedroom.I like the actual logo on the holster too ... add's a little flare to them instead of being just plain old boring black holsters (logo is a more white with grayish tones)The M&P is a 5" barrel and it slides through the front just fine ... it's a little tight to start but just being in it for the day it's sliding in an out easy now. And the PPQ is a 4" and goes right the edge of the holsters barrel output area, and of course the 3" Shield slides in perfect being so small and short.Very happy with the clean minimal look of this over the bulky type add-on safe door organizers. I have added a 6 mag holder and ordered another one to put below it along with 2 velcro straps to hold a couple AR mags. This set-up will look Amazing on the full size door from top to bottom.But in closing .... VERY nice holsters, feel solid and the lining is soft. Can't ask for better.Pictures attached as well to kinda see what they look like on my door ................

These have worked very well so far inside my safe, stuck directly to the carpet liner on the door. Hold a full size M&P .40. As well as an FNX .45 just fine. No sagging or separation as far as I have seen. I will say, you can't use them for any pistol with a lazer or light on the piccatinny rail, just not wide enought for that. Overall very satisfied.

After reading all the glowing reviews on this item I was very interested in giving it a try in accommodating a Springfield Hellcat Micro 9mm pistol with a loaded weight of 20 ounces. I was looking for something that would attach to my wooden headboard to conceal the pistol. It arrived quickly through Prime, and the material and stitching were found to be good though it did not want to accommodate the pistols reflex sight. I tucked it in as tight as possible and mounted it upside down on the headboard with the supplied Velcro adhesive pad which attached firmly.Within an hour, I heard a thud and found the EZ Pistol Holder and pistol on the bottom of the headstand though the adhesive pad was firmly in place. Thereafter, the Pistol Holder would not adhere to the Velcro with the pistol holstered.Now maybe this just doesn’t have the ability to be used upside down or maybe it is made to accommodate small and/or lightweight pistols with no optics. It certainly wouldn’t accommodate any of my larger sized pistols that all weigh in excess of 27 ounces loaded. This item was returned.

Excellent product for hanging handguns from safe door. The included adhesive Velcro isn't big enough to distribute weight from a full size handgun. I solved this by purchasing industrial strength 2" Velcro and cutting 2 strips and placing them side by side down the length of the door. This allowed me to place the holders on an angle and still get full contact with the Velcro on the back side of the holders. It also distributed the weight of the guns nicely, along with probably being a stronger adhesive than the short pieces of Velcro included with the holders themselves. Other than that, they are holding a full size 1911, Sig p226 and p229 easily and securely, and would certainly do the job for a smaller sized handgun.

I thought these were great. I used the stick on Velcro that came with it on plywood since I do not have a carpeted interior of gun storage. You do have to make sure the surface you are sticking it to is very clean. I used duct tape first to pull off any loose particles before attaching the Velcro. One gun started pulling down from the top. For my situation, I wanted to move the holsters around at times so I went out and bought more Velcro. I found that cutting a longer piece of Velcro than the one on the holster and putting the added length above the holster, it held better since it had more holding power and was not being pulled right at the top of the holster. I will be getting more.

This holster fits my .380 with a laser sight perfectly. I like that the sewn on hook material really holds firmly on the carpet of my vehicles. This is my second purchase. A+++++

Purchased 3 of these for the inside of a Stack-On gun cabinet door. I placed my unloaded Sig P226, FNX-45, and Taurus Raging Bull and within 24 hours I get to hear the wonderful sound of 3 separate guns falling to chip the hardwood floor just in front of my cabinet. The velcro held up fine (which is the only reason this got two stars as if you have a carpeted door you should be good) however the sticky backing is woefully inadequate for holding anything along the weight of those firearms apparently. I will also say that for longer guns it is a great fit, but testing my girlfriends SCCY in it, I found it to not hold too well if at any angle but mostly vertical, when horizontally mounted her SCCY slid out very easily. That's not really a big knock against the holsters themselves, as they did retain my other 3 handguns very well. So overall something of a mixed bag, could be useful for some, apparently useless for me for my intended purposes