BINLUN Stainless Steel Watch Bands Replacement Metal Watch Straps Bracelet with Durable Butterfly Clasp 18mm 20mm 22mm 24mm 26mm in Black, Silver, Gold, Rose Gold, Gold-silver for Men and Women

This is a BEAUTIFUL watch band/bracelet, but there are a couple of downsides to this product which, at first, convinced me it was unusable and had to be returned: 1. The sizing pins (holding the individual links together) that had to be removed in order to size the band for my wrist were impossible to remove using the supplied tools! Using another pin removal tool, I was able to coax the required pins out of the band by first pushing the split end of the pin slightly further into the link (normally improper) and then properly removing the pin from the opposite side of the bracelet using the tool. 2. Even after removing all the typical removable links (all but the watch and clasp attachment links), the band was STILL too large (long) for my wrist! At this point, I had to get creative and ended up removing the end links that are supposed to attach the bracelet to the clasp. Fortunately, and with a little coercion, the pins on the clasp used to attach the bracelet were barely thin enough to (snugly) fit through the resulting, now-exposed center links of the bracelet and then attach to the clasp. The clasp itself, fortunately, hides the modification from view, and I was able to reduce the band to a reasonable, though somewhat "sloppy" fit. I am hoping that some strategically placed "moleskin" will take up the remaining slop, though the watch is now somewhat wearable without it. The result has been a much more expensive-looking two-tone, Bulova "Precisionist" watch than when it was originally fitted with a faux alligator, albeit genuine leather band. If you can get it to fit, I believe you will love this band!

If like me, you're getting this to see if you like the look of this style of bracelet, it's fine. If you're looking for a weighty, solid feeling/sounding and permanent addition to a nicer watch, especially a top heavy one, i suggest you pass.Also pass if tou have very thin wrists. Even after taking all the links i could out, it was still too big.

Pretty decent watch band, but the tools it came with are utter trash. The link removal tool is misaligned, making it completely useless, and the pin removal tool has a giant metal spur on one side, making it nearly impossible to actually remove the pins.The band itself is fine. A little on the large side, but it fit me fine after removing two links from each side.

You better have big wrists! With all the adjustability used the smallest sizing is still close to 1/2 inch to long for my 6 and 1/2 inch wrist. Makes no sense for an 18mm lug width (smaller watches use 18mm).

The quality is good, not great and it tends to jangle a little, which I would be ok with but this band is more like an XL. At a 6.5" wrist it is loose at full link removal. Can't say that I have ever had a band with this little adjustment If you are at a 7" or above then it should be fine.

This is my favorite watch band, looks Great and excellent quality.

Had it on my watch for last two years. Still working the paint is kinda easy to scratch on metal but besides that good quality

I took out all the links and the top two rows to make it fit the watch.

The bracelet is decent enough for the money although I did have to doctor it to fit. I have a 6.5-6.75" wrist and after removing all 6 possible links I still needed another 3 out. I was going to send it back but as I had tampered with it (removed the plastic wrapping ands links) I thought I'd just have a go at making it fit somehow since it was pretty cheap and unsure if I could get my money back at this point. It can be done but do so at your own risk!!! Do it at the clasp end incase you scratch it up. I used a chisel and small hammer to break the pins within the links that you can normally push threw and remove, just make sure you leave two jangly bits not one so it meets up with the clasp bit.. my other gripes would be the space between the bracelet and the case, may be different depending on your particular watch, on mine it leaves a pretty wide gap IMO.. One more thing is, as I have removed extra links, I can now see the cut out grooves for the spring bars where the bracelet attaches to the case as they have twisted round more than usual, and due to the gap, it's not going to be noticeable to others but it's one of those, when you see it, you keep on seeing it every time you look at your watch..I'm sure il forget about it soon enough, but I'm already thinking maybe I should've just got a nato instead 🤔

This strap is Engineered out of quality Steel and it shows in the quality,i t is every bit as good and my "Roli" strap and feels great, there are cheaper straps on the market, this is not one of them, this is built to last the life of your watch and beyond, mine is on an APEKS 500m Steel dive watch and has made it superb, I rarely comment however this strap warrants it. The seller is excellent at customer service and delivery cannot be faulted.

The item is well made and looks smart. Sadly I had to return this item as I found it was not possible to make sufficient adjustment to fit my wrist. Even with all the extra links removed and maximum adjustment on the clasp it was still too loose on my wrist to use. I have similar items in the past and always found it possible to adjust them satisfactorily so I am surprised that this one did not adjust enough. Amazon has promised to refunded my payment.

I removed all the links possible and it is still too big. Avoid!

Oversized, should be more links to remove. Big dissatisfaction.