Waterdrop 10UB-UF 0.01 μm Ultra Filtration Under Sink Water Filter System for Baçtёria Reduction, Reduces Lead, Chlorine, Bad Taste & Odor, 8K Gallons, with Dedicated Faucet, USA Tech

If you know basic plumbing, this is very easy to install. Just take your time, watch a youtube video, do whatcha gotta do. But if you want clean water from the hose? This is whatcha want.Installed in a little over an hour. I had to step up the drill bits to get a tight fit like I wanted but the install was pretty straight forward. I cheated and I got two sharkbite connectors that screw into both sides of the valve, shut the water off, removed the pressure, cut the cold line in half, pressed them into the sharkbites, turned it on, no leaks, and BAM clean water.Our water was tastijg a bit funny and I have had this brand before a few times. Wayyyy cheaper than a PUR or Brita, a d wayyyy longer lasting filters. We'll change ours once a yeat just for safety. But we were buying gallons of water and we were up to 8 dollars a week in water. Just not affordable.I highly recommend it for any home really. If you don't have half inch plumbing you will have to adapt it, but it isnt that big of a deal. Just google it. Or hire someone.If you install it wrong it WILL flood your house. I recommend ALWAYS testing for leaks for a few days after install of any plumbing.Good luck!

You get what you pay for. The faucet is pretty good but really not great because its wobbly and looks pretty cheap. The single filter also doesn't seem to be as effective at improving water taste. Next time I would probably opt to by the filters and faucet separate and to jump for the 3 filter systems.

It is a beautiful product,, easy to install, looks great ,, I love it… everyone who buys a lot of bottled water should get one…. Water taste so great…..

I just moved and my place place has pretty poor water quality, my water lines have significant amount of iron / rust in the hot lines, and there was a slight musty flavor to the water. It's a new building so they are still flushing out the lines. I didn't feel like buying Brita filters all the time, I also already have a hole cut out in my counter top for a soap dispenser, so I bought this to install into my counter top. Install was easy and simple, all the hookups were clear and easy to understand. Installed in 10 mins and tested there was no leaks. They even included a mini roll of teflon tape (but more than you ever need for this install), a thoughtful gesture. The countertop dispenser felt like good quality, pretty heavy, and the spout is made out of metal. All the connectors looked like they were well made. You get more than enough feed line, so you need to cut to fit if you don't need it all. If you are cutting, make sure to leave a clean vertical cut (ideally with a utility knife, and not a pair of scissors), so you don't have issues with leaks later.So I had access to a HP Liquid Chromatography machine, so I had my water tested prior and post filtration. Was careful to make sure my samples were jot contaminated. The filter made a pretty dramatic difference on a number of metrics.Pre-filter iron was 33 PPB or 0.03 mg/l, post filter it went down to 0.3 PPB or 0.0003 mg/l.Pre-filter Copper was 143 PPB, post it went down to 2.9ppbTook the nasty musty odor / taste out, and made the water pleasant to drink.This filter will not filter out dissolved solids, like calcium and sodium. My water had very high levels of both (55,000 ppb of sodium and 26,000 ppb of calcium, it's within municipal standards, but makes my water taste slightly salty), neither metric changed outside of the normal margin of error from the HPLC machine. So if you are looking to soften your water this isn't what you are looking for, you need a reverse osmosis filter for that, but RO filters also filter out good minerals so you lose out on those.Overall very satisfied with this, and highly recommended.

The installation instructions were above average and the filter seems to be working well.

The box came with everything necessary for easy installation with the exception of silicon tape (you will need extra). Most connections are compression fittings so they are super quick to install, I completed install in 20 minutes with a couple pliers and a screwdriver to anchor the filter to the undersink cabinet.

So far so good. No way to know if it's doing anything since tds won't change, but it was easy to set up and water comes out fast.