Welcome To Desertcart

You are browsing Seychelles's store.

We have a store for Canada. Visit your country store to view the latest offers.

ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage DC Inverter IGBT 1/2 Inch Clean Cut Post Flow and 2T/4T, for Beginners DIY
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6Thumbnail 7Thumbnail 8

ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage DC Inverter IGBT 1/2 Inch Clean Cut Post Flow and 2T/4T, for Beginners DIY

4.4/5
Product ID: 491806181
Secure Transaction

Details

  • Brand
    ARCCAPTAIN
  • Voltage
    110220 Volts
  • Recommended Uses For Product
    Cutting
  • Power Source
    dc
  • Noise Level
    60 dB
50 Amps max power
📺Large LED display
🔄Dual voltage 110/220V

Description

⚡ Cut like a pro, anywhere you go!

  • SMART LED DISPLAY CONTROL - Real-time voltage & current monitoring plus error codes for instant troubleshooting.
  • CUSTOMIZABLE COOLING MODES - Adjust post-flow cooling (5-15s) and toggle 2T/4T modes to extend torch life.
  • POWERHOUSE PRECISION CUTTING - Clean 1/2 inch cuts on steel, aluminum & copper with advanced IGBT tech.
  • ULTRA PORTABLE READY TO GO - Weighs just 13 lbs with shoulder strap; plug-and-play setup under 30 seconds.
  • SEAMLESS DUAL VOLTAGE FLEXIBILITY - Switch effortlessly between 110V and 220V for home or pro workshops.

The ARCCAPTAIN Plasma Cutter CUT50 delivers professional-grade 50 Amp cutting power with dual voltage (110/220V) flexibility, advanced IGBT inverter technology, and a large LED display for real-time monitoring. Designed for both beginners and pros, it offers customizable post-flow cooling and 2T/4T modes to maximize consumable life. Lightweight and portable at 13 lbs with a shoulder strap, it sets up in under 30 seconds and is perfect for precise, clean cuts up to 1/2 inch on steel, aluminum, and copper.

Large manufacture image 1Large manufacture image 2Large manufacture image 3

Specifications

ManufacturerARCCAPTAIN
Part NumberARCCAPTAIN
Item Weight13 pounds
Product Dimensions13 x 6 x 8 inches
Country of OriginChina
Item model numberCUT50
SizeBlack/Red
ColorCut 50 110v/220v
StyleCUT 50 110V/220V
MaterialIron
Power Sourcedc
Voltage110220 Volts (DC)
Amperage Capacity50 Amps
Maximum Power11000 Watts
Air Flow Capacity150 LPM
Sound Level60 dB
Hose Length3 Feet
Special FeaturesPortable, Built-in regulator and gauge, Set up within 1 min, Easy to use, Powerful performance
Included ComponentsFilters
Batteries Included?No
Batteries Required?No

Reviews

4.4

All from verified purchases

A**R

Great plasma cutter

Did some reviews of plasma cutters after using one on my friends. I didn’t want to spend a lot on a product that I would probably be used a few times a month and happened to come across an advertisement for the arccaptain 50. The reviews on YouTube were very positive, the price was right, so decided to take the plunge. When I received the cutter I was surprised how light and compact it was. I tried it on 110 and it work good until my air compressor kicked on. I had to order an adapter for the 220 since my 220 outlet is the old 3 blade type. Tried on 220 and was surprised on how well it cut. My friend stopped by and was so impressed that he ordered him one to replace his 15yr old cutter. Over all I am very well pleased with it and hopefully it will give me years of service.

K**Y

Pleasantly surprised, cuts well for the money.

Bought this in a pinch to replace my plasma cutter that’s in for repair. Cuts well, I used my air dryer from my big machine, you’ll need to play with the air volume to get clean cuts.Let’s see how long it last!

G**N

We'll see how long it holds up

So far, very impressive.WILL cut 1/4 mild steel with 120psi fairly clean.Has to be run on 220 for best results. On 110 it'll probably steuggle with 12 gauge.Low duty cycle so short cuts. See how long it lasts but pretty unbeatable for the price.

J**S

Initial impressions- good

Want to preface this saying that I will update the review with further use. I have used a plasma cutter quite a bit in the past but it’s been 15 years or so so I’m slightly rusty.Initial impressions are good, very happy with how small the unit is compared to the older hypotherm I’ve used in the past. Ordered at noon on Saturday and unit was on my door step at 4:30pm Sunday night. Unboxing and assembly was easy. The pilot arc ring terminal could be slightly smaller to better fit the stud but that’s a very minor complaint. The air hose I didn’t have any difficulty like some, a simple hose barb and quick connect fitting and I was in business. Unit fired right up and cut some dirty 1/4” I had handy to test it with.Used again today to cut out a grave marker for a family pet from 1/4” stainless, very satisfied with the unit so far especially for being all in with spare consumables for around $340 versus the price tags of a comparable Miller unit

R**D

great Tool for the price its awesome

This is a Awesome Machine it works very well and im pleased with

D**S

Spot on

The description doesn’t exaggerate anything. You’re getting exactly what it’s saying you are which I’m very pleased with. You will need to buy some parts separate in order to hook up air compressor but completely worth it.

S**E

Works sometimes, but only on higher amps

Will not run on 110/120v 20amp as advertised. Blows a 110/120v 20amp circuit every time in shop and on generator. If you read the manual, at a min this cut 55amp plasma machine requires 35amps. At that point you should really have a dedicated 220-240v 30-50amp setup. Also the air regulator on this does not work correctly. I have 125psi feeding from the air compressor, regulator set to 50psi. Pull trigger, plasma cutter runs long enough to deplete the 50psi and stops working. Air in compressor still at full pressure. Regulator does not “regulate” the air coming into the machine.

C**R

Great value for home use

I've cut 1/8" to 1/2" thick smooth enough you don't need much of a grinder. I've had and used other plasma torches and I actually prefer this pt-31 with the drag tips over the Pilot Arc pt-45 or pt-65. It's easier to see your cut and the consumables are WAY cheaper for the pt-31

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
₨9101

Duties & taxes incl.

Seychellesstore
1
Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Imran F.

Very reliable shop with genuine products. Will definitely buy again!

2 weeks ago

Ravi S.

I loved the variety of products available. Will definitely shop again.

2 months ago

Arccaptain Plasma Cutter Large Led Display 50amps Cutter Machine 110 | Desertcart Seychelles