Spectra Premium 99370 Vehicle HVAC Heater Core Replacement Compatible With Jeep Wrangler

I received this packaged well. I was able to get it installed and it works well. Fixed my jeep's one sided heating issue. Now I have heat on the driver's side not just passenger's side.

I have a 2018 JK and it had the common issue of no heat on the driver side. I used the 'shortcut' method to install this and I now have heat out of all four vents! It is not plug and play by any means but I certainly saved a lot of money by doing this install myself and this unit fit and is working great.

Installed on 2011 Jeep Wrangler Unlimited using the shortcut method. Jeep heater now working.

Product was packaged nicely and safe !l. I personally did the shortcut install on my girlfriend’s 2014 Jeep Sahara and the heat is better then it was new ! Product worked for me perfectly!

Slipped right in where it was suppossed to. No rattle. Good fit. Note: I did "quick swap" or whatever you want to call it where I cut out the old one and replaced it with this and connected with hose and clamps. I did not do a full remove-the-dash install so I'm not entirely sure how the length of the outlets and fit of the outlets work on a "proper install".

I did the short cut install. Passenger side was blowing warm and drivers side blowing cold. After installing, got hot air out of all the vents.

This part was exactly what I needed and was a great value. Easy to find on the website and easy ordering.

IT fixed my no heat issue, and a slight overheating issue. I did the quick swap(no dash removal)so had to cut ends in turn voiding any kind of warranty.. Lasted close to a year, now starting to overheat slightly and zero heat coming out of driver side, and just warm air on passenger side. Also its up almost 30 bucks from when i bought it. Going to try a different brand this next go around, and hopefully fares a little better than this unit did.

Saved over $1500 installing it myself. Check the Youtube video on how to do it. Amazon recommends buying the clamps (Qty. 4 ) and hose together. I bought he hose separately for $8.00 and clamps at $1.00 ea.Strongly recommend using a vibrating saw to cut the bracket. I soldered it with expoxy glue and it worked well.

Had to replace my JK heater core and this was a perfect replacement part

Perfect fit. I did the easy replacement

The heater core comes with the piping to in the middle behind the complete dash. Since my core was replaced a while back , and started leaking on the Orings inside the pipe crimps at the core side. A shop from the previous owner obviously tried to recrimp with a plier and that may have held for a while.It needed to be replaced by me there was a constant leak, done with the help of instructional video on line.It involves cutting the pipes of existing core to connect to pieces that are left going to the firewall.Its a difficult install as the dash and bracing for it are in the way. Unless you take the whole dash apart and remove it you wont be able to install it as delivered with the pipes going through the firewall connection.

Good product Works well