🚛 Stop Strong, Stop Clean, Stop Confident.
The Power Stop K3167-36 Z36 Truck and Tow Front Brake Kit combines proprietary carbon-fiber ceramic pads with drilled and slotted zinc-plated rotors to deliver enhanced braking power, 30% less dust, and superior heat dissipation. Designed specifically for heavy-duty trucks like Ford Expedition, F-150, and Lincoln Navigator, this bolt-on kit includes stainless steel hardware and noise-insulating shims for a quiet, reliable upgrade without any vehicle modifications.
Brand | Power Stop |
Vehicle Service Type | Van, Car, Truck |
Year | 2010 |
Global Trade Identification Number | 00792088806642 |
Assembly Required | No |
Orientation | Front |
OEM Part Number | K3167-36 |
Manufacturer | Power Stop |
UPC | 792088806642 |
Model | Power Stop K3167-36 Z36 Truck & Tow Front Brake Kit, 6-Lug Setup |
Item Weight | 66 pounds |
Product Dimensions | 14 x 14 x 12 inches |
Country of Origin | USA |
Item model number | K3167-36 |
Is Discontinued By Manufacturer | No |
Exterior | Zinc Plated |
Manufacturer Part Number | K3167-36 |
Position | Front |
Special Features | Brake rotors are zinc plated for maximum protection against rust., Brake rotor, pad & hardware engineered to work together to increase the overall braking on vehicles with heavier loads, Bolt on upgrade for stock brakes, Target towards truck & tow, Dual layer high temp rubberized shims insulate noise for virtually silent braking |
R**5
Very good quality and good fit. Smooth quiet and powerful.
Very good quality good fit and nice looking. These brakes are smooth and quiet and powerful.
G**R
Resolved braking issues on 2016 Ford F150
Purchased for 2016 Ford F150. Perfect fit. Resolved poor braking performance. Smooth installation. Overall happy with purchase.
C**O
Great customer service that stands behind their warranty and a great product
So I've installed these breaks and pads on all our vehicles over the past few years. Mainly for trucks F150 and F250 and they really do perform well. There's a definite noticeable Difference between these and stock brake pads and rotors.Over all the install is extremely easy it's a typical brake job nothing too fancy about it. I will say the break in period is extremely important . Read the directions and follow them it's not a hard process basically several brake checks getting the rotors hotter and hotter. The whole breaking process takes maybe 5 to 10 minutes as long as you've got enough area to continuously get the vehicle up to about 35 and then engaged the abs with heavy braking.We did recently have a problem with one of the pads failing after about 6000 miles. The pad word a weird angle and actually chewed up the rotorTo be 100% honest I was a little nervous after reading some other reviews about customer service, but after reaching up to them they were extremely helpful and stood behind the warranty. After providing pictures of the failure they shipped me new pads and rotors within a few days . Occasionly bad products get out which is just a part of life but the fact that they stood behind their warranty and made the whole process extremely easy will make me a customer for life. If you thinking of getting a good set of pads and rotors at a reasonable price and these are the ones you want.
A**T
Nice brakes
Really good for the money
M**S
Rotor position
Good product. Everything needed is included. Care should be taken as to location of rotors (left and right) Wish they had included more brake lubricant
A**R
PERFECT FIT REPLACEMENT
Put the Powerstop Z-36 brake pad and rotor set on the front of my 2015 Lincoln Navigator myself and it was a simple procedure. Took about half an hour per side. What a difference! Stops straight as an arrow now with a nice firm pedal and zero feedback or jitter through the steering wheel or brake pedal. Last brake job I did was with OEM Motorcraft pads and resurfaced the rotors and that was at 43K miles. At almost 98K now. Will be interesting to see how these hold up to stopping my 6,000Lb beast, especially while towing. Hopefully they at least meet the mileage and performance of the OEM brakes if not outperform them. I know other people who have put these pads and rotors on their trucks and swear by them. So far with only a couple hundred miles I'm impressed and I'm very anal about everything on my vehicles being just right. There's few things worse than cheap brakes or bad tires. Will order the set for the rear and install those next so all 4 corners match and will evaluate them when it's time to do another brake job to replace these when they wear out. Will update this review then.
A**R
Perfect fit
Great fit, work perfect with all new stainless hardware and caliper pin grease
T**.
Perfect fit and upgrade
I like te fact that they are drilled and slotted and rated for towing the rotors are thick and have not shown signs of warping in a few months the pads are upgraded so there is no inner or outer making for an easier install so far so good and ready to reorder go another truck
Trustpilot
1 day ago
2 weeks ago