PARTSRUN A411000131 A411000130 Ignition Coil Module for Echo Hedge Trimmer SRM225 TC-210 EB212 GT-225 ES-210 GT-200 HC-150 PB-200 PPF-210 HC-160 HC-180 HC-200 SHC-210 SRM-210 SRM-211 ZF-IG-A00273

I had sudden stoppage of my trimmer. Watched donnyboy73 you tube video. Determined it was the coil. Received and installed easy. Some other coils did not include boot. I wanted a easy bolt on. Started right up. Runs great. Would have been 50 bucks Oem from mower place.

Ok, this worked out well on my Mantis Tiller. When installing, just use a business card for the distance between the magnets on the flywheel to the magnets on the coil. This is important. Otherwise, fairly straightforward to install.

Easy to install. Be sure to set the proper air gap for the coil . I liked the added length of the coil wire. The boot at the end of the wire is set at 90 degrees. Now my Echo PAS225 trimmer is back to work.

Everything works good at the moment. Getting distance right from crank is coil is a trick

Does not work.

I have an older Echo SRM-225 (?) and it would no longer start. I assumed it was the carb and bought the Huztl kit and installed it, but no luck. After more time on youtube I realized the coil could was likely the issue, and bought this and it worked great. In the end I am using both happily and the cost was pretty low to get back up and running, but next time I will troubleshoot better instead of assuming. Proper use of a testing light would have identified the need for a coil and not the carb. So far so good!

This coil was a perfect fit , the primary failed after seven weeks of usage.coil was metered out and it was a failure

Simple bolt on and my problem was solved. My Echo is running like a champ.

Easy install, works