Remflex 6022 Exhaust Gasket for Mopar V8 Engine, (Set of 2)

These work well, but there are some things to note. They do not bend, so order a second set to keep ready if you break one, you can continue on your project. Also, they don't have the heat shields that the felpro ones do (you can remove the felpro ones and use them with these gaskets). Finally, because they are so fragile to bending, tape them on the exhaust manifold with blue painters tape so they won't move around as much (don't do this on the ports, between the ports). The tape will burn off. The package recommended a torque to 20 foot pounds, Chrysler specified 19. I did the best I could since you can't get a torque wrench in. Also, I used the dorman stainless hardware kit. I noticed that the manifold bolts kept loosening as I tightened them down (probably because the gasket is so "spongy"), I added some split washers to prevent the bolts from backing off.

These gaskets are great! First set I ordered were bent so I returned them and ordered a new set which were fine. I have a slightly warped manifold and these gaskets sealed it up perfectly. Pair the gaskets with the doorman stainless hardware kit and you won’t have to do this job again

I cant say enough about this gasket. First off ive never seen one so thick and with so much "squish". After removing the manifolds to repair the dreaded 5.7 broken bolt tick I was able to remove all but one broken stud. The last broken stud decide to fight me for 4 hrs before it snapped the tip of my stud extractor off and lodged it dead center in a recessed stud. I fought for several hours before having to admit defeat and needing to get my vehicle back together for work. I decided to install it minus the one stud. I torqued everything to remflex manufacturer spec and fired it up...absolutely zero tick or leak of any kind. Several months later now, still zero complaints!!! I wish I knew about these guys years ago when I used to fight repeated header leaks!!

first item shipped was damaged. but after contacting seller the item was replaced in no time. great product great seller!!

I have a set of no-name Chinese stainless headers on my 5.7 HEMI. They were inexpensive and not bad quality overall, but one of the flanges was warped beyond the sealing ability of a normal gasket. I could have had a machine shop mill the flange, but it might warp again, and the cost would be more than the price of the Remflex 6022 Exhaust Gasket. So I got a set and they did the trick. No more exhaust leak, and no more O2 codes. They get my recommendation.

only complaint is the set I got were almost split from being bent, which will ruin these types. Likely it was only starting to leave a seam where it would likely be trash. Installed them but hopefully I won’t have a future exhaust leak.

These gaskets are extra thick and conform to irregular nicks and scratches on gasket mating surfaces. They work great at sealing up the exhaust and eliminating those annoying ticking exhaust noises.

I used these on a 17 RAM 5.7L hemi that keeps popping exhaust manifold bolts. It is thick enough to fill all the gaps and let the manifold expand and contract with minimal stress to the 10mm bolts it's bolted with. (The engineers that came up with that at Mopar needs their heads examined) Has worked flawlessly since installing and glad I choose this gasket. Will highly recommend it if your having issues like mine!