🖨️ Stick with the Best for Flawless Prints!
The Outus 3D Printer Glue Sticks are designed for optimal adhesion on heated beds, made from non-toxic PVP material. Each stick lasts for over 100 prints and is compatible with various build surfaces, ensuring a hassle-free printing experience. The upgraded packaging not only enhances aesthetics but also maintains the same high-quality performance.
X**M
Stays Put!
Works great. We ran into some issues with 3D projects moving while printing, but this glue has worked perfectly and holds everything in place until the job is complete. Definitely a must have. Projects are easily removed once done and there is no mess.
M**T
Works well, use often
Have worked well on my Bambu labs printers when printing TPU on a smooth plate.
P**R
Excellent value priced bed glue!
I use these on my Creality K1's bed and they work just as well as any name brand. The prints stick during printing and pop off easily when the plate is flexed.
F**L
Better than Hairspray
I was using hairspray to increase adhesion on my print bed, and this works better. Easy to apply, and clean off once the bed cools. Has good adhesion. I likely did not need the quantity. The tube hasn't dried out yet, after 3 months use, so there appears to be some longevity.
J**.
It works very well, no worries
The problem i had with my 3D printer is now gone thanks to this product.Thank you
M**H
Works great with different filaments
Works great! I've been using this on the PEI sheet in my Qidi XMax 3 with PA6-CF, PETG and PLA. I've had no issues with prints lifting, and no issues getting prints to release after prints are complete.
D**Z
Way to strong of an adhesive atleast for my solvo v7
The item stuck to the surface and the nozzle then the nozzle moved to do another part of the print and it ripped the fan exaust off and half the fan with it and ruined mmy 3d printer since they dont make that piece for it anymore and my projects now keep overheating and ending the process
T**N
Slightly above 50% success rate so far
Definitely isn’t multi use like stated, maybe I’m naive for thinking it would work twice but it left me with a gummed up hot end from trying. Also got a warped print even with a fresh coat, on a previously successfully printed part none the less. This is my first experience with glue on a printer bed, typically don’t need it but this winter is cold in the basement. Helped a couple of prints and needs a fresh, heavy coat each print.. will be looking into different options in the future.
Trustpilot
2 months ago
1 day ago
