LUMBER JACK Electric Hand Planer 910W Power Wood Planning with 82mm Width, Planing Depth Adjustment, 16500 RPM Woodworking Tool Includes Blades & Dust Bag

Planer works well. It was easy to setup. The only modification I have made was to mount the complete assembly on a platform on casters so that it can easily be moved around the workshop.

I have been delighted with this machine so far. I have put some really scruffy pallet wood through it and have been very pleased with the results. It was very easy to setup, although I did use Youtube vids alongside the rather brief manual. It's a lot cleaner than expected and the chip extractor fitting has been very effective. Overall, it is what I've come to expect from Lumberjack stuff. Good quality (Good enough for what I do.) at a reasonable price.

Not used as yet, very heavy.

Having waited several weeks for this item to be delivered I was expecting something rather better that the cheap models advertised. On the plus side it was well packed and everything was present according to the scanty instruction booklet. However there was only one Allen key but three different sizes required to make all the necessary adjustments. After a few passes with a test piece of timber it became apparent that it was not flattening wood and repeated passed did not rectify the problem. After careful adjustment of the blades and fence further tests were carried out with no improvement. I then put a level on the tables and discovered that the out-feed table was not flat and badly twisted. I searched for adjustments to rectify this but found that the table was cast and non adjustable. The item was returned to Amazon with no hassle, except the time it had taken to assemble and disassemble and repack. I may have just got a bad one so If you go for this model check the flatness of the table before assembly, this may save you a load of agro.

Easy to assemble and easy to use. Fence is ok but needs tweaking for each set up. But overall im well pleased with this planer thicknesser.jointer. Good value..

Works great, just oil the bed otherwise the wood will stick

As a product i do like lumber jack, but for some reson i have issues with the switches, my lathe switch is intermittent but the new planer i used once and that was all i managed before it stoped turning on , it is rhe only thing that i can find that lets this machine down.

Machine arrived with tables out of alignment and thicknesser settings drift whilst in use.Completely unusable and seller has only issued partial refund for the pleasure.LOOK ELSWHERE AND BUY DECENT SECOND HAND NOT THIS JUNK