






Size:3 Scrapers+ 100 Blades We are a tool manufacturer that specialize in producing vehicle, kitchen, household application, small tools, etc.. We devoted ourselves in this field for over 10 years and our aim is to produce kinds of most professional tools and application and to support hundreds of thousands of families a more simple and comfortable life. The beautiful life is started with a fine tool, and a fine tool is started from us.
E**R
Good for light-duty tasks
The blades were alright -- definitely didn't stand up to much scraping, but they're disposable, have a a surprisingly keen/sharp edge, and did the job. Importantly, they tend to bend and stretch under stress rather than break and shatter, which is good.The single stud that catches the blade center hole needs to be more robust and have a more positive hold. Blades slipped half off frequently.Blades should seat deeper, and protrude too much, allowing them to bend.Overall, my hands aren't that large (even for a man) and the size of the handles was a bit small. Obviously, like many things, these are manufactured where people are smaller. A bit larger would work far better.Handles, however, aren't sturdy enough at all. In removing a transparent car bra (sticker) from the front end of my car, all three broke in quick succession. The two studs that retain the blade repeatedly snapped off -- and the full-width retaining edge on top generally failed at that point. Definite design flaw. Snap, snap and snap (see photo).These must be sturdier. I definitely don't recommend for any tedious scraping task that requires really bearing down. They'll just break apart. This might have been a heavier-duty task than intended, but they should be designed to withstand a bit more use. The blades should be disposable -- the handles? Not so much.Perhaps this is why three handles are included? If only one was included, refund requests would be immediate and predictable. As it stands, my intended job is done, and I'm happy to pay for that.Probably just fine and very economical for light duty tasks -- or to look at the handles as giveaways with the blades?
W**S
Get some!
I was using a metal scraper to get my prints off my bed, but since I use a sheet of PEI - it just scratches the crap out of the PEI sheet!These work very well, leaves nothing behind and came with a ton of replacement blades. I did use this to get a sticker off some glass and worked very well. Didn't have to use any sprays or anything to get the adhesive off. Scraped it right off no residue!One thing I would change; where the blade slides on there are two posts that hold it in place. Those need to be a tad longer so that it's more stable and doesn't move or slide around in the handle. Other than that, this has been very good for the use - doesn't make any marks in my prints either; definitely a plus.10/10 - Two sided blades, so a 100 pack is really 200!
G**Y
Indispensable tool for my Janitorial business
I added this to my janitorial tool belt and have already found it useful. The two-sided feature is very clever. I used the plastic scraper end just this week to take a hard glue blob off of a floor. Many attempts to remove it before now were unsuccessful. This tool just popped it off of the floor with no damage to the surface. And razor blades are obviously useful for many things. For my business I find them very effective for removing hard water deposits from around faucets and around sink drains, as well as taking scotch tape off of desks and tables.
K**Y
Works as advertised, but god thing there was a box of extra blades
I needed to get some tub adhesives off of the tub. These were old, crumbly, non-slip adhesives that didn't want to get scraped up. These blades prevented me from scraping up the bottom of the tub. I was very glad that I got the box of extra blades because I went through about a third of the extra blades. I don't think it was the blades' fault. The adhesives were really hard to get off (I was using Goo Gone as well). But to make it go faster, as soon as the blade slipped, I would replace it. I was able to flip the blade to the other side first, then replace it. They were super easy to replace, even with slightly slippery hands. Highly recommend if you are looking for a non-metal blade. They were decently sharp and worked well.
B**C
Waiting for more time
It's a little small for a man's hand and can slip out, but overall not bad. The only problem I had was after a few weeks of use it broke while cleaning the grass out of my lawn mower. However, for the price it's what you expect. It's a good option for those dirty jobs around the house where you don't want to use a metal scrapper that can scratch. But I would buy the two or three pack so you have backups in case they break.
C**2
A must have around the house and in the Auto
I bought these to keep around the house and in my car. I love that I can scrape stickers or labels right off of things. It is also great for removing those fun stickers that my kids love to leave on the window of my car. My husband has also found that they are also great for cleaning the bug gunk that sticks to the car grill or windshield before a car wash.What I love the most is that they are plastic so I do not have to worry about slicing my hand or finger open as I have in the past with the metal razors.The only downside is that the edge does dull after several uses.
G**C
Works great
so glad I grabbed these! I am a school custodian and they work great to scrape gum and tape. I like that i can put it in my pocket and not worry about getting stabbed.
M**L
Plastic Razor Blade Scraper
These have been a lifesaver! I purchase items wholesale for my flea market booth and the items most always have some sort of sticker. I happen to see a youtube video about plastic scrapers being good to get off stickers without destroying the item.They work perfectly for what I needed them for and would highly recommend them. They are a great price to and they come as a two pack with 10 blades. But I doubt I'll need new blades any time soon.
Trustpilot
2 days ago
1 month ago