LutronAriadni/Toggler LED+ Dimmer Light Switch for Dimmable LED, Halogen and Incandescent Dimmer Switch, 150W, Single-Pole/3-Way, AYCL-153P-WH, White

I had recently replaced an old 2-U fluorescent with a Lithonia CPANL 2x2 and found it to be a bit too bright. While this dimmer isn't listed as compatible by either Lutron or Lithonia, other LED+ family dimmers are listed.Pros:- The "scan the QR to get install instructions" is the best I've seen. There is a simple wizard to navigate based on whether its 1-gang or multi-gang and single pole or 3-way. Its short, to the point, and large enough to easily see/understand on a small phone screen. Its better than Ikea assembly pictograms as it has actual .. instructions.- Wide dim range with separate toggle, works with existing/regular switchplates.- Installed in literally 10 minutes in a 3-way single gang.- Dims the CPANL down to almost nothing and can be trimmed all the way down and light still turns on (a couple seconds delay) with no flicker.- No buzzing noises from dimmer or light.Cons:- 150W LED limit is a bit low. However it should work for most retrofit uses because 150W LED replaces 1000-1500W of incandescent. Larger loads in new construction should probably use 0-10V dimming.

The switch was easy to install and feels and looks pretty sturdy. This is the first time I've bought this style of dimmer and I'm happy with how well it works. I especially like the ability to adjust the low end dimming so the lowest setting still allows for a slight glow from my LED dimmable bulbs. There is no flicker at the lowest setting - it functions extremely well. It has been very consistent with the dimming levels each time I turn it on. It's a good switch and worth the price.

Works perfectly, no buzzing, wide dimming range and I love the precision adjustment it allows for the lower dimming range. It was easy to install and just works. I also like that it fits in the existing cover and is not obtrusive. If I need another, I'll get one of these.If you have difficulty with small switches though, it's not for you. Ex. I wouldn't get these for someone with arthritis. The sliding switch is small and probably would be hard for them if they had to move it a lot.

UPDATE Dec.2023:Dropping a star because the slider dimming is unreliable. Not often, but it happens that when turning it on it ignores the slider position. You have to slide it back and forth to get it right, and it 'normalizes'. Not a big deal, and not a significant inconvenience, but if you are OCD and need 100% repeatability then you might consider a different dimmer. If you can handle the rare, occasional glitch then this will serve you wellSUMMARY:Fully recommend!! Fits perfectly and smoothly dims LEDs without flicker or noise.PROS:Fits perfectly in the junction box, and fits through all the light-switch plates I've used so far.The shape/taper on the slider is very comfortable to use (not square like the other models I've seen)--It doesn't get caught on things, or accidentally moved when flipping switch.The dimming is adjustable, so you can fine tune it to your individual circuits.--Can tune down brighter bulbs for subtler use.Does not make noise or hum.Lights don't flicker or jitter.Dimming is very smooth and linear.CONS:The switch body is big. I would not enjoy mounting two of these side by side in a box. Possible, but super tight.A little pricey, but high quality.USAGE:I have two of these in the house now for exterior and interior lights. It's fantastic to be able to dim your outside lights so that you're not the obnoxious neighbor who ruins the night time. The bulbs I ordered for the outside lights were WAY too bright, but pretty, and this switch tuned them to the right level.And now my kitchen can have a morning/night mode that is easier on groggy eyes.It's also great to be able to adjust the dimmer, as not all lights behave the same. (the 'minimum power' needed to still show some light changes from bulb to bulb, circuit to circuit). I don't like the lights to go off when the dimmer is at the lowest setting, and this adjustment allows me to fine tune the cutoff point of the slider.And boy oh boy it works well! All the way down to just a few lumens coming out of each bulb.

The media could not be loaded. Very simple installation and fits perfectly with my existing switch plate. I’m not sure why some people are complaining about the dimmer switch as if they weren’t expecting it to be as small as it is. This was my main concern before buying because my hands and fingers are fairly large. But as you can see in the video, I can work it just fine.The build quality and look and feel of the switch is about what you’d expect for $20. Dimming speed is as fast as you move it and the brightness will go to the max of your bulbs. Very happy with this purchase and will buy another one in the near future.

Worked great. Easy video to follow for install

I've used this in an overhead kitchen fixture, and in a bathroom fixture where I wanted to be able to dim the main lights at night, and it works well. They have added a QR code to watch an install video to make sure you can wire it in. You should have basic electrical skills before doing this; if you do not have such skills, I would strongly recommend you search out some youtube videos on household wiring and installing switches prior to purchasing this. There is also a small blue adjustment range toggle to adjust the "range" of dimming on the main face of the switch. Be sure to use this prior to putting a faceplate back on the switch to see the trigger point where your LED bulbs will activate; some don't come on if the voltage is too low. Also, if dimming LED bulbs, be sure they are "dimmer rated", or you could have negative effects like visible strobing or overheating. If you are unsure if the bulbs are dimmer rated, then perhaps consider getting new ones that you know are, and moving the old bulbs to a fixture that will never use a dimmer.

Switch worked as it should. It has helped control our kitchen lighting very well.