4LIFETIMELINES 3/16" (4.76mm) x 25' - 316L Marine Grade Stainless Steel Brake Line Tubing Coil, Meets SAE Specifications, Universal Compatibility, Brake Line Replacement

Great quality, fast shipping, looks fantastic on the newly painted frame

Quality parts, great construction, speedy delivery,

looks to be good quality, look good, bent well, will update if anything changes

I used this to make brake lines for a boat trailer. It is able to bent by hand and did make fairly tight radius turns without kinking. I also double flared it with no cracking or issues. I did purchase the Titan double flaring tool and it worked perfectly with this tubing. I did make some plugs to close off a fitting on the brake calipers and the tubing was able to be crushed on one end, then folded over without cracking, like most stainless does.

This line is harder to bend and flare than plain steel line but not too difficult if you have the right tool. You only do it once with stainless steel so its worth the extra effort...it should outlast the vehicle. I would not recommend trying to flare stainless steel line with the typical cheap flaring tool. I had one of those once and it broke the flaring disc on soft steel line so it probably wouldn't handle stainless steel well. I use an Eastwood tubing flare tool that clamps in a bench vice and has a long handle that provides the leverage you need. I see Amazon has that tool and a less expensive version by TGR. Excellent tool that makes both 45 degree and bubble flares.

Works well

Good product to duplicate factory brake lines. I used this line along with a new Capri brake flare tool and all four lines came out awesome! I went with stainless so I never have to worry about lines giving out again! Do it once, do it right, make it last. Price difference between Stainless and reg steel is negligible so no point cheapening out for $8-15. In the Spring I’m going to redo the lines on my classic cars. I already bought 5 more rolls !

You can bend this line by hand without any special tools. Also if you can get the old fittings off your old lines clean, you could reuse them and then just measure how much line you need, cut with rolling cutter thingy, then double flare the ends of your new stainless line and re-install and add brake fluid and check for leaks! This is great stainless line. It is of very high quality and seems like 316 marine grade stainless, which is perfect for Michigan where the road salt is awful in the winter and rusts out trucks very quickly. Thank you again for supplying this product. God bless.

Very nice quality

Works excellently for my purpose of air lines for a 72 cutlass!

Perfect quality wouldn’t go any where else for brake pipes

Met published specifications.

Made all new brake lines for my restomod C10 build using this line. Chose to do single flare with appropriate fittings, have had no leaks over 2 years. Using a bender this line bends very well, can also be bent by hand if you know what you’re doing.