Watts Premier Standard Air Gap Auxiliary Faucet with 1/4" Supply Tubing Connection for RO Reverse Osmosis Water Filtration Systems, Touch N'Flow Spring Loaded Handle, Chrome

Replaced one with pretty much the same design, one that isn’t listed any more. This looks identical except for some small aesthetic details. Very simple to replace, tho I reused the old compression connector, which I didn’t have to cut and replace. Don’t expect it to last more than maybe 4 or 5 years at most, since we have hard water, and it collects on everything unfortunately…. Still not particularly expensive, so I hope they remain available in the future!

1'm using one of these instead of the one that came with my new Culligan EZ-4 water filter system at home, and I've found that the Watts (116102 standard faucet) faucet is a lot better than the cheaply made one that Culligan provided.This Watts faucet model doesn't drip after usage either!It was a pleasant surprise to see that the Watts 116102 faucet has a continual "ON" running position too!Whether your using this faucet to replace an old one, or upgrade it from the one you have ... The quality you get at its iow price ...... you won't be disappointed! It also blends in well above your sink :)You should onsider purchasing this faucet to replace the one that came with the Culligan EZ-4 water filter system.You'll be "Glad" you did! Easy to Install!* Reliable - Durable - Cost Effective *Note: EZ- 4 Culligan Filtration System.You'll loose the feature of a light telling you it's time to replace your filter, but just know that the manufacture recommends times they should be changed and taste is another way to determine if its change filature time. So loosing this feature shouldn't deter you away from getting it.Enjoy!

My Watts Premier RO Pure Plus water faucet was leaking so I needed to replace it (after 2 years of use). This faucet isn't an exact replacement but it works and likely to have less leaking (since the faucet is one piece as opposed to the RO Pure Plus faucet which is two pieces)...plus the price is cheaper. It took me about two hours to install (I'm not the most handy). The instructions on the box are horrible/not helpful so thanks to other Amazon reviewers who left much better instructions.Also, try to find "how to" video by searching for "Purflo Air Gap Drinking Water Faucet Installation". It's not exactly the same, but close enough to give you a good idea of how to install this faucet.I would recommend you install a "Quick Connect" to the brass line (that connects with the blue line) since this faucet does not have Quick Connect but my RO Pure Plus did. I got this connector from the big box Lhardware store (it was hard to find since these connectors aren't standard and you have to be exact or it won't fit ). The dimensions are 1/4" OD x 1/4" Comp. With the Quick Connect, it made installing this faucet much easier.The faucet itself is fine and works with no leaks. The lever to press for water is really strong, so I do have concerns about how long it will last...but for now, it's a great replacement for my old leaking faucet.

PERFECT FIT FOR MY CORRODED FAUCET FOR MY 2 STAGE WATER FILTER. WORKS GREAT.

This Watts premier air-gap faucet is a perfect replacement for our 35 year old reverse-osmosis (RO) sink faucet. We had the Watts RO system professionally installed in 1990. Over the years, we have increased the system's capacity. Eventually, the original faucet, also from Watts, just wore out. It didn't leak, but the handle wouldn't stay turned on in that position.This new watts premier air gap faucet is a surprisingly inexpensive exact replacement. It's half the price of many imported air gap faucets. Even better, it came with color-coded poly tubes already fitted. So they were a perfect fit to the RO system's existing connectors. Installation was a breeze. It fit perfectly into the pre-punched hole in the new stainless steel sink. It's clear that the faucet can also be used as a non-air gap faucet just by not using the red, black, and blue tubes that it comes with.Please ignore the slight and embarrassing line of stain on the top of the back splash. We replaced this RO faucet as a part of an ongoing kitchen remodel. This phase involved a new sink, main faucet and the RO faucet. Counter tops are the next phase!

Summary: Black plastic lever can break in a way that is not visible to the user.I spent weeks trying to fix my RO water filtration system after installing this faucet because my original 12-yr old Watts Premier faucet wore out.Water stopped coming out of the faucet a week after install. I replaced the tank since it was old and history showed the tanks only lasted about 8 yrs in our system. Flip the faucet on. No water.I quadruple checked the filtration system. I have mobility and dexterity issues so it takes me couple days for each check.I can feel the water running through the system to fill the tank. The incoming pressure is set to 90 psi. The tank pressure is set to 5 psi. Waste water is running through the drain tube. The filtration system is working beautifully.I pulled off the faucet spout to see if something had been jammed inside somehow. The small amount of water that drained from the spout had little black bits of plastic from the black plastic lever.The brass pull release for the faucet's water valve chipped away just enough of the black plastic that the black lever appeared to operate in both the up and down positions, but was not actually lifting the brass pull to release the water.If possible, I would give negative stars for poor materials.Due to my inability to complete these checks and investigations within the time given, I am not eligible for a refund.

Good