Vevor 1100W Magnetic Drill Press with 37257 Inch (40mm) Boring Diameter MD40 Magnetic Drill Press Machine 2810 LBS Magnetic Force Magnetic Drilling System 550 RPM with 11 Pcs HSS Annular Cutter Kit

Good deal for the price and my limited use.Only issue after drilling less than a dozen holes are the internal wire splices have a poor connection and melted, so at first the mag wouldn't work, then the drill motor wouldn't start.Replaced with spade connectors, and it's fine now .

It is amazing how well this unit works. Vevor makes cheap tools, some good, some not so good. This is great. Variable speed, reversing, decent magnet strength. It is well built, and even comes with a starter pack of bits. I have a Milwaukee " made in USA" unit, which is certainly top of the line. This is not ,but does compare with Milwaukee's new made in China models. Get it while you can!BTW. The drill chuck adapter weld-on shank was oversized, so wasn't able to use it.

Works okay for the occasional job to punch holes in iron. The chuck did not run true so I did buy a better one for the machine.

The best drill since they started slicing bread. It drilled 264 5/8" without any problems, straight out of the box. I bought the S&F standard annular cutter set and couldn't have been more impressed. The speed and accuracy of the hole size will blow your mind. I turned down the speed to setting number 4 on the drill and it cut without any chatter and a tip temperature of 75 to 95 degrees F. This was thru 3/4" steel and took around 20 seconds per hole. I used Winona van Norman cutting fluid cut to 15% with water.

I finally had a chance to use mine about a 1/2 hour ago. I took it out of the box, plugged it in and went to turn it on and smoke started rolling out of the top of it . I don't think it did even one revolution.. it wasn't under a load. I didn't even have the magnet on just seeing if it would turn on and poof it's done for. Waiting to hear back from them now

Does exactly what it is supposed to do. The magnet sticks, the drill spins, and the coolant feeds. The box arrived with the bottom completely ripped off, but the contents were contained in a plastic bag so nothing was missing. The magnet can be overpowered if you don’t let the bit do the work.I had it working within a few minutes of putting it together. I slugged forty four 7/16” holes in 1/8” plate . The drill motor remained cool.If I had to buy again I would try to get one with variable speed, but for the amount of money that I spent on this tool, I can’t complain. I suspect that without the variable speed that I will go through bits more quickly, but overall great value for the $ spent.

Drilled several holes in think flat bar same cut speed and quality as the Milwaukee we replaced that was $1400. Time will tell but so far great. I like the variable speed and reversible settings that are missing from the other one.

I really like it even though it's a cheap magnetic drill press the reason I didn't give it five stars is because the spring punch that punches out the slug it's caught a lot of the times inside the drill head and I've got a stick of screwdriver in it to get it to pop back out but besides that it drills really well for no more than just being a cheap magnetic drill press