Hole Saw Set, Meterk 17 Pcs Hole Saw Kit with 13Pcs Saw Blades, 2 Mandrels, 1 Installation Plate, 1 Hex Key, Max Size 6"(152mm) and Min Size 3/4" (19mm), Ideal for Soft Wood, PVC Board and More

I am a big fan of Milwaukee products. However most of my time is spent as a DIYer or doing low voltage electrical. I have several Milwaukee hole saws including the kit 49-22-4025. I have spent well over $120 getting all of these pieces together and then needed another size I didn’t have. I took a chance and spent a couple of bucks less to get this set. Overall it’s a great deal. There are more sizes than any of the Milwaukee options I’ve seen without spending $200+. They are designed for soft wood and other materials, but they work great. They even go big enough that you can put in can lights! They are not designed for as thick of material, but I would have no problem using it if needed. The Milwaukee ones are a lot deeper, that makes the cutting need extra torque from the drill when you only go from one side and removing the cut out piece is a little tougher on the Milwaukee. I started going from each side a while back with the other ones because it makes it easier to unload, these ones are not as thick, they never really get jammed. I think you could do a 2x easily enough by going at it from both sides. Another plus on the technique is the edges are cleaner than when you push through. The only other drawback is that there are two sizes of arbors, but it only ships with one drill bit. That means no double duty until I add a drill bit. I’ve never needed to be running two sizes at the same time and I’m sure I’ve got an extra bit lying around, but that is a difference. The last thing that I like about the Meterk is that the whole case has more sizes and is smaller. The Milwaukee has a lot of air in the mold. That makes it really hard to get into a small tool bag, the Meterck fits a lot better.

Very sharp blades and cuts well,worked perfectly, great value for price,would highly recommend

I am a handyman doing home project and bought this hole saw kit for two main reasons:1) cut 6" hole for recessed lights2) cut hole in drywall to get rid of small bad part, then cut a hole in a new drywall piece using same diameter.The new round piece will fit the cut off perfectly without having to do any measurement. This make drywall patching easier.This kit works perfectly and the pieces that are cut are perfectly round.

I found this kit to be a great value for the money. Right away I used the largest (6") saw to build a set of outdoor gaming boards (3/8" Plywood). It worked very well. All the necessary attaching parts are included in the kit. The plastic box the kit comes in makes storage and transport very easy. I would highly recommend this kit for the price.BUYERS NOTE:The instructions for this kit specify it is intended for use with wood and other soft materials. I wouldn't recommend using them on anything the instructions prohibit. It is a value tooling kit. I would be concerned the saws might not stand up to use on metals, concrete, etc. It could be dangerous if improperly used.

The best thing I liked about this hole saw set was the price. Under $20! But, you get what you pay for. It is VERY cheaply made...... that’s how the price can be so low. After I assembled the hole saw with the biggest cutter (6 inch diameter) the pin broke. This broke before I did any cutting. As I was cutting a whole in sheet rock, I noticed the cutting teeth are not on the same plane. The whole thing is warped and wobbled the whole time I used it. I did manage to complete one hole. I am VERY dissatisfied with the quality, but I did get the hole drilled. I hope it can hold up for three more holes in drywall. I would not have bought it if I knew it were so poorly made.

Your browser does not support HTML5 video.  I was missing a few sizes from my last hole saw blade set, and I found this one that had all the ones that I needed. Out of the box, I was not dissapointed, where they are made of fine steel, and can take cutting with not even a blemish of wear to the metal. I have made a few cuts with the blades and I find them perfectly round and make very precise cuts where it make it so easy to use. I was also impressed with the box, holdes all of the blades and the bits too just perfectly where the box has a small footprint and easy to store away. Very happy to see that the blades were pre-oiled and well taken care of prior to unboxing the blades. A sign that the manufacturer really takes pride in the blades. No cons, the blades are perfect and work very well, where I am very happy with the purchase.

The only issue I had with this is that each sawhole is not deep enough to make it through a 2x4 (the 1.5" thickness) in one go, so you had to flip it to the other side. However, this ultimately wasn't that big of an issue as it allowed for easy removal of the block.I used almost all the smaller holes through framing, plywood, and particle board. I also used the 4" and 6" holes in drywall. It went through them with no issues. The box has recommended drill settings depending on the hole size used. Followed those and it did cut well.

Great hole saw kit. You get 13 hole cutting blades and a few parts to attach them to your drill. They work great. I needed a few to drill some different size holes for a custom vanity we are building. The saw blades worked great and had no issues cutting thought the material. Remember these are for cutting softer materials like plastics and wood. Not idea for hard woods or metals. We had no issues cutting though drywall and some soft wood. Great value for the price as it has pretty much everything you need to get the job done.