WEN 10423 3 x 2 x 1-Inch Steel-Hardened Precision 123 Blocks, Two Pack

Bought two sets, so four total. Cleaned them off with mineral spirits and some denaturated alcohol and measured all dimensions, and each end, with Mitutoyo calipers (precision to 0.0005"). They all landed on the 0 but depended on the pressure applied, meaning they are probably somewhere in their stated 0.0002" tolerance. The middles all dipped to X.9995" with the same pressure applied to the edges, but stayed at 0 with lighter pressure, so each of the blocks has a very mild dip in the middle, but that's ok. I also used a DIN 875/00 knife-edge reference square to check for square. They're good enough for wood working and some rough machining setups. Some corners were so good there was zero light leak. Others were off a bit. Definitely not ultra-precise blocks, but more than good enough for most needs, especially at this price point. Blocks like these make EXCELLENT clamping and square blocks for building boxes or other things where traditional full size woodworking clamping squares won't fit. They also won't flex or bend, so you can apply significant clamping pressure to use these to force tight joints into square.

Some have noted problems with these blocks, but mine seem very good indeed!. The blocks are square, true, flat, and have a near mirror finish when you get the oil/grease off. These do come (like nearly all such tools) wrapped in oilcloth paper. Not as bad as cosmolene, but it does require degreasing followed by a proper waxing to preservw finish and prevent oxidation. The packaging is not great: just wrapped in the paper, then in a plastic bag, and finally in a light cardboard box. Just be sure to check for damage after cleaning the blocks. As stated, mine arrived in good shape. RECOMMENDED

Fast safe shipping Excellent surface grind. Desired, Hardened finish. Very good matched flat/ parallel tolerance. The threads are 3/8- 16 as stated. Good tolerance. The chamfer depths are wavey Most likely a worn out tool 100% ZERO concern. Or interference. The threads were tapped individually not as a matched pair. One side will NOT allow bolting together. Threads & block alignment one side is .100 -/+ off. NOT a problem unless specifically bolting the blocks together as a pair. Overall very good blocks.

Great for the money. Good accuracy, good finish.

Seem well made. Ground surfaces and threaded holes seem clean. Measured 1x2x3 with calipers.

These easy to use 123 blocks are basically a no-brainer for nearly every woodworker. Excellent for setting blade heights, or distance to fence or other layout situations. Especially useful with setup bars. These are the perfectly sized for 1 inch, 2 inch or 3 inch spacing. They will last you for many years, they're a great value. I've had my set for 5 years. The only downside is they are steel, so do what you can to prevent rust. I'm in a humid climate, so it's an issue here. I've cleaned them and applied wax recently, hoping that that will help long term. Easy to store away with your other layout tools.

Very wrll made

The blocks are higly accurate and simplifies some projects even in woodworking. They are quite hefty and don't feel like cheap material. The only downside is that they do rust if left untreated but that's solved by spraying a protective film after use. Can recommend.

Bella gente, il prodotto arriva in scatolina di cartone con stanpato il nome e codice prodotto. All'interno non troverete istruzioni o foglio illustrativo ma solo i due blocchetti incartati con del celofan, in una bustina di plastica...consiglio di munirvi di straccio e petrolio per una bella grassata. Prodotto consigliato per hobbistica.

Well made and as described.

Llegaron excelente producto

5 stars

Not Starrett quality but pretty good. All dimensions measure within .0001 of specified sizes. I’ll surface lap out the high spots. For what I paid for them I’m really happy.