CURT 17063 Round Bar Weight Distribution Hitch with Integrated Lubrication and Sway Control, Up to 14K, 2-In Shank, 2-5/16-Inch Ball

Great sway bar and weight distribution product. Easy to install and operate.

It works well and its well made

Good construction, worked for a 30 ft enclosed trailer.

I had this professionally installed. I have a 2022 Nissan Frontier SV 4X4. My camper is 5000 pounds dry weight. My truck didn’t sag at all. The sway control works great.

Installed last week. Took 2-3 hours only due to starting with all 8 spacer washers for cant (Per instructions), ended up disassembling and reassembling 3 times down to 3 washers to get angle right for hooking on 1 link down on chain. Last trailer seemed to have 6 or 7 spacers so not unreasonable.Have a 2"X 5" rectangular tube frame, not c channel, Chain hook brackets work but kind of funky, going to get some 3/8" self tappers and attach through the provided holes. Tension screw doesn't really work that good on tube frame, wants to walk around, more for c-channel frame. going to replace that with a shorter version. Really just to hold things in position until chain connected anyway.After assembly, drove 620 miles freeway and highway, really noticed the difference so well worth the money and effort. Only thing I really don't like is the chain hooks, when trying to tension chain slips off unless choosing link that allows hook to start about 1/2 way up so really can't get as many links hooked as I would like. Instructions say to lift hitch, hook chains, and then lower but last trailer could just grab at the bottom of the swing with cheater bar and crank them up.Better have a really big wrench set to install. Beefy hardware. My 1/2" rattle gun was not up to the job, needed my 3/4" drive stuff. 2-5/16" Ball came pre-torqued.

Works great. The trailer is a lot easier to tow.

It has really made hauling the travel trailer easier and no swaying.

Do not buy. Set this up on a Saturday. Went to go camping on a Thursday and just by ball being in reciever set screw heads snapped off. Could have really caused major damage if in transit with trailer. When I lost one I went to use a screwdriver on second screw and by simply turning the Phillips screw head snapped with 0 pressure. Trip would have been ruined if I wasnt able to fix this. Probably better than factory now but I will be returning out of principle