SUNDERPOWER RC Flashing LED Lighting Kit for Scale Cars and Trucks

I ordered this light kit to use with a new Traxxas Telluride trail truck that I have purchased. I wanted to put some lights in the front, and then some tail lights on the truck.With this kit, I was able to install several lights:--2 red LEDs for the tail lights--2 amber LEDs on the sides near the front fender for marker lights--2 white LEDs in the main headlights--2 white LEDs in the "fog lamps"--2 blue LEDs in the front daytime running lightsI was left with two more white LEDs that I could use in the future if need be.The lights come with really nice little housings that you actually install in the RC body that holds the light in place on the body. This makes it so that you don't have to use any glue. The lights have plenty of wire so that you can run them all around a fairly large RC body and have them plug into the control box easily.The control box mounts to the inside of the body with some included double sided tape. It then draws power from a channel on the receiver. The plug to provide power is included, and it actually is a pass through so it allows you to plug it into the receiver, then into the control box, and then plug another item into that channel and still use the channel.The lights all work great. They light up fairly bright, and when put in place on the body they look amazing.For the price that this kit costs, I think it's a really nice buy. I would definitely get another set for another truck in the future.Highly recommended.

Got a lot of compliments on this. I like running my Traxxas Stampede truck at night and got difficult to see which way it was facing once it got dark. Installed this kit by drilling holes where I wanted the lights. I used all but two of the lights, but could have used them all. It looked more like a spaceship coming at you with all lights installed, and I thought it looked better with less. This set is nice because you have front and rear lights which is great when trying to tell which direction your truck is facing at night. Little bit more effort to install than the regular traxxas lights. I would suggest using hot glue on the inside of body to make sure light does not pop out of socket when bashing.

These lights work on 4.8 to 6.0 volts, any more (or less ) than that & they may come on, but only a minute or so then burn out, plug the little RED buttons plug into SET on the blue box, turn power on, each time you push the RED button you'll get different lighting (all on / all flashing, etc.) the round plastic pieces provided to hold the bulbs would not work for me as I wanted to mount the bulbs in a metal truck, too thick, so I had to improvise, they might work OK in plastic bodies, so I'm happy with the lights & price.

I was surprised to see how small the lights were, mind you I was using the product for the small and portable LED lights for a costume, not an RC car, so there was some issue with the power supply. This isn't at fault of the company, just my own.But despite the power supply, the lights work well and are really bright (at least the red and blues are)

This is a good low cost alternative to the ridiculously overpriced lighting systems from most RC vendors. I bought it to use on my Axial Wraith and got it all installed without any issues.4/5 stars because the flashing sequences shown in the schematic don't match up to what I saw in testing. i.e. Lights 1 and 7 should both flash together and they don't. Minor issue, but worth noting.

I bought this to pimp out my grandson's Fischer Price Mini Quad, lol. I got a battery holder from Radio Shack wired the whole thing up. Everything worked perfectly. The LED holders are for a thinner material such as a model or the body of an RC vehicle so I had to tinker with them for the thicker material of the mini quad, but it worked out great. Now riding the quad is all my grandson wants to do. This product would work great for model cars/trucks/space ships, Helicopters/drones. I even thought about incorperating one into a halloween costume (Halo Helmet). And it apparently works well with Mini Quads, lol. Great product!

I installed in an axial wraith and my trail buddies call me the off road police. There are different modes of lights and one that works like a cops light bar. They are pretty tough and give a good spread of light they don't project very far but cover the ground good.

I have seen this unit elsewhere and that red button that you see in the pictures is usually included, but it is NOT part of this kit. The control box is very very cheap, but mine is working for now. I wouldn't be surprised if it stopped later on. I'll do what I can to waterproof that box, as I bet even a little moisture would kill it.I really wanted the kit with that button though, it's in the pictures but NOT part of this product.