SparkMaker Low-Cost 3D SLA Resin for 3D Printing UV-Curing Resin 355-420 nm(500g)
Description
- Photosensitive resin for 3d printing with a high price-performance ratio
- Provides a great finish and feel.It was designed to simulate ABS plastic and has a comparable tensile strength and modulus.
- For use in SLA UV light source 3d printers & ABS Alike, Super tough, clear and can even be used to engineering components.
- For use PEFT film or FEP film resin tank.
- If other third-party printer are used, the printed parameters must be adjusted
Color:Gray Feature：Tough Color：Clear Hardness：60D Elongation：115% Description：ABS Alike Tips： 1.Do not touch the skin directly with the resin. Wear gloves when handling. If skin contact occurs, wash it with soapy water. 2.Shake the resin evenly before use. 3.Do not drop the resin onto any parts other than the tank and aluminum plate. If it is dropped, please clean it in time.The photosensitive resin reacts with some plastics such as ABS, PC, etc. 4.SparkMaker's resin can also be used on other PTFE film or FEP film 5.Keep the resin out of reach of children and pets.
Reviews
2**Y
Should be named lcd-A : It's light amber, not transparent.
My FHD Sparkmaker arrived and I did not know which resin I wanted to start with. For just a few dollars more I went for the clear resin. Had my first print and overall it was an ok print. Yes, a build error occured and the model is missing some features. I think I might have caused the error also 😑. After I removed the part I noticed the material color is more amber than clear. Even when cool white led lights are shined through the part it glows amber (warm white). In the marketing the parts do not appear these color. My resin was produced November 2018
D**H
Fantastic prints
Great resin, great prints. Cleaning is difficult, but that's to be expected. Be sure to have 99% alcohol on hand for cleaning the resin tank of your printer, the prints, and any spillage. If you're using this with a Sparkmaker printer, also be sure to have a set of strong uv lights to finish the curing process. This resin should finish with an opaque and hard surface. Any amount of tackiness left on your prints is just a matter curing and cleaning.
C**R
Got only one good print out of the whole bottle
Only one good print on a Anycubic Photon. And it was a very small piece. Shook it. Changed it to every single kind of exposure setting I could thing of. It either didn't stick to the build plate, stuck to the print bed, or even worse glued the two together.
M**C
Great resin for miniatures!
This is an excellent product. I use it to print minis for my D&D games and found it to be less brittle than other resins which is good for the type of miniatures that print.
C**K
Decent resin
This is a decent resin to use with the snapdragon maker thingy, wait this is for the sparkmaker sla printer. Um yeah the resin seems to be resin but the sparkmaker well not so sure about how many sparks it makes yet
T**J
Nice and clear.
Clearer than Monoprice Rapid. Yellows with longer-term UV exposure though.
J**.
ok
good
L**N
Worked great!
Clear resin, works well in a SparkMaker3D UV printer.
Common Questions
Trustpilot
2 months ago
1 month ago
