Art3d 100-Pieces Peel and Stick Stainless Steel Backsplash Self-Adhesive Metal Tiles, 3" x 6" Subway Stove Backsplash (Not Magnetic)

I have looked at many comparable items at Home Depot, Lowe's and all over the web. For the exact same thing you can easily pay $20 per square foot. This is by far a better bargain. It is almost half the cost and similar quality. This cut my cost and install time in more than half. I'm very particular and OCD. There are some subtle imperfections to a few tikes, but would not be noticeable to most people. I'm just picky. The tiles are very easy to cut. I suggest cutting them from the back so you do not damage the surface or face of the tile. If you have a sharp razor and score it a few times, the you simply bend it until it makes a pop, then you just bend the metal back and forth until It separates and it leaves a perfectly clean line. I even suggest taking a light grit sandpaper to dull the edge a little more, but it isn't sharp in the first place. A grinder worked well for some more intricate cuts. As for the other comment referring to them being slightly bowed. Some of them are ever so slightly bowed but it is very very simple to straighten out. As with any tile or finishing material, you should inspect it before you install. That's anything you do 101. Lol. Most of them are perfectly straight but as with anything else you will get some subtle variances. The adhesive on the back is very strong. As it states it is pressure-sensitive so the more you push on it the tighter the bond. I only had to remove a couple and I had to use a putty knife to get behind it and really work to get it off of the wall once it was secured. The overall installation and finished look is beautiful. I am a pretty Advanced DIY but any novice or beginner can conquer this job and make it look professional. I went with a standard layout for a simple clean look.

Love these tiles. I'm a novice DIYer and I'm just discovering that I can do an entire kitchen makeover just by sticking everything I need on! We decided to use these for a feature wall in our kitchen instead of as a splashback and am so far loving the look. The adhesive is very strong, as some other reviewers have mentioned. I took their advice and was very careful about placement but still made a few mistakes and the tiles are very very difficult to remove. An Exacto knife cuts through them easily. Just score on the steel side slowly with lots of cuts until you are through the steel and then you can be more aggressive to cut through the foam backing and adhesive. You'll want to sandpaper the cut edge for a smooth finish. Leave the protective plastic film on while you do this cos the tiles will scratch easily from the sanding, I ruined a few tiles this way. Took me about 3 hours to do about 6 SQ feet and I had to cut about 12 tiles. One thing to note, there will be a very slight gap/space between the tile edges, especially the corners which are rounded, even if you line them up perfectly since you're not using grout. I would suggest ordering 4 or 6 single tile samples to see how they look up close. We love the overall look and the way the natural light reflects on the layout pattern which changes through the day for us. But with close inspection, some may not like to non-grouted finish. This also makes it very unforgiving in terms of achieving perfect alighnment and a completely flush surface. I can see all of my many mistakes but plan to hide them with a strategically placed floating shelf and other kitchen items. That being said, it's an amazing improvement and totally modernizes our old kitchen without spending thousands.

I'm in the middle of my 1st time use. There's some key things to know, and some easy mistakes to make that need to be avoided. Out of the box take 1 sheet of 8 tiles and after pulling on the sheet edges to create a space in between the tiles carefully cut the plastic in between the tiles to separate them. (see pic) Warning: you should use high quality new blades in a solid box cutter / utility knife. Don't touch the tile surfaces with the knife as they're easy to scratch. Leave the protective plastic on each tile until installing each one. Make sure the surfaces where the tiles we be installed are clean and smooth. Measure and mark level lines on the wall to start. Caveat: You get one shot at sticking these tiles up so do everything you can think of before starting to put them up. I tried taking one off and it wrecked the tile and peeled off chunks of the sheet rock paper. You'll note that most tiles have a few small imperfections (dimples). I guess you get what you pay for. CUTTING: This is surprisingly easy. Use a clamp (pic) so tile won't move. Use a good amount of pressure to score the tile FROM THE BACK! You will only need to score the tile once through the foam side when it's done well. Making more than one scoring line can screw things up more than help. Keeping the score line straight is essential. If it is not, don't use the tile unless you have to and then use it in a low visibility area because any tile next to it will have a small gap. After scoring grab the tile with both hands and firmly snap it. You will be looking at foam side while snapping the two sides of the tile away from you. I was amazed at how easy and consistent this important step was Once ready to install a tile take the protective plastic off first then then adhesive side plastic off. Carefully line up one of the long edges and gently flatten the edge as snug as you can against its adjacent tile edge. Then flatten out tile pushing firmly. Make sure it is going to be properly placed before laying it. Tile removal is not a good option. I highly recommend starting in the least visible site. This way hopefully no one will notice your learning curve. I didn't give 5 stars because 1. Imperfections, 2. Inadequate instructions 3. Tiles virtually unremovable without causing more damage than it's worth.

It's been 3 years and the tiles still look great. Love this product. My home was built in the 1950's and the kitchen has that ugly wood paneling. Coverage is great, no extra glue needed and easy to cut with the right cutters.

Dimension rend plus facile la pose.Produit de qualite.Mais attention comme l’explique le dépliant vos murs doivent été très droits .Je vous conseille de passer le niveau partout et attention à la façon dont les joints ont été tirés surtout dans les endroits non visibles à première vue Ex arrière frigo ou qui étaient couverts avant vos reno ex par le modèle de vos anciennes armoires.HC

Easy to install. The metallic colour is good.

Very nice durable product. Not cheaply made. Exceeded my expectations in looks. However,the tiles were bowed out in the packaging and not all of them adhered to the wall like they should have,even with wall preparation exceeding manufacturers instruction

Excellent quality and fantastic seller to deal with!

Looks great, easy to wipe up, simple to cut, but lots of damage pieces, mostly on one corner of the box, must have been dropped hard because it broke the protector... take your gamble, if so many pieces weren’t damage I’d give them 5 stars