Compatible with NVIDIA Jetson Nano Camera IMX219-160 8-Megapixels Camera Module 3280 × 2464 Resolution 160 Degree Wide Angle of View with IMX219 Sensor

Definitely does the trick. I screwed it to a Lucite stand I had, attached the ribbon cable to the CSI port on my Nano, and one Linux command later, I was seeing myself in my lab on the monitor I SSH'd into the Nano from. My image was inverted, but adding a detail to the command flipped it. The camera I ordered IS a bit of a wide angle FOV, but that's what I wanted. Simple, good quality, decent lens, and it worked on the first shot. That's all I wanted.

the image quality on this camera is not very good. It could be because the jetson orin nano doesnt really have the good drivers for the camera. A lot of artifacts. Also I had to buy a separate flex cable for the camera.

After switching the CSI cable to 22pin camera side/15 pin Jetson Orin side camera is working great. Nice little camera.

A number of things: 1.) This is not plug and play - you need to run jetson-io.py and configure the connection(s) to the camera. 2.) As mentioned in other reviews, you need a 15pin to 22pin converter cable. 3.) The sensor is not great. The video quality is grainy. 4.) The sensor does not appear to be temperature stable. There is a red halo in the image which consumes more of the image over time. While this is ok for basic proof-of-concept work, the image quality is not good.

Easy to setup on Nividia Jetson Nano for ML testing rig. You could also use the Raspberry Pi camera if you already have one, but the time you save from not having to install and configure device drivers is well worth the couple dollar difference.

Works as advertised with my Nvidia Nano Wide angle lens.

Conforme

The device works precisely as expected; will purchase again!

Good Product worthit, thanks