Sanus Universal Low Profile Tilt TV Wall Mount for 37" - 80" LED, LCD & Plasma TVs, Eliminates Glare with 10º of Tilt & Post-Install Adjustments - 3 Step Install - Safety Certified - MLT14-B1

This is a great mount for 16" studs. I hung it this weekend and the 26" width gives you some good flexibility with positioning. With 24" studs you may want a slightly wider mount. I used it to hang a 55" Samsung flat screen with VESA 400 mounting holes. I have about 6" range to slide the TV left or right from center with that setup, so was able to position the TV exactly where I wanted to.The included directions were clear and easy to follow, even specifying the proper drill bit to use for pilot holes. Their is a lot of TV mounting hardware included, unfortunately TV's vary so much that the screws I needed were not included. I don't blame Sanus, there's just too many configurations to try and anticipate. I was able to quickly pick up what I needed (M8x45mm) at Lowe's. I recommend looking at your TV instructions for mounting to see what screws you will need ahead of time to be prepared.I debated between this mount and some cheaper high-rated options for a few days, but ultimately I decided that a single steel mounting plate was the safe way to go for a little more money. If you're spending $1k+ on a TV, don't skimp on the details. Having a single mount plate is sturdier, and easier to get level.The two arms that connect to the back of the TV are well designed with a spring loaded safety release at the bottom. I attached them per my TV's instructions and was able to attach the TV on the mounting plate easily. The spring loaded clips snapped right into place. The TV can easily slide side to side still, which is a plus/minus. I would kind of like a set screw to keep my kids from accidentally bumping it to the side once I have the position set.Angle adjustment is pretty easy, there are two screws with knobs you can turn with your hands. You probably want to set those to your anticipated angle at a moderate tension before lifting the TV into place. Reaching behind the TV to adjust the knobs after it's on the wall is a tight squeeze if you have large hands.The TV is so close to the wall that there isn't a lot of room for cables or things behind it. I was able to get a small power strip and my TV only has a single cable that comes out the back horizontally and runs to an HDMI hub, but if you had a bunch of cables to attach after it is on the wall it could be a challenge. Especially if the cables come straight off the back of the TV. You probably want to plug in as much as possible before lifting the TV into place.Once you get everything up it looks great.

These are the best mounts. Purchased 4 mounts. Easy to install and heavy duty.

Worked great !! Got 3 of them all different size TVs.Easy to install all hardware included great price.

Works great for wall mounted tv

Easy part: great sturdy mount that’s easy to install. My 3rd Sanus mount, have loved them all. However, the “post install” adjustment is a little deceiving, as it doesn’t let you level it. Had I read just a little harder I would’ve seen that. Additionally, to simply plug in a new HDMI is such a pain you have to basically take the tv off the wall to do it. Doesn’t rotate side to side.

Great item Easy to insall and very sturdy

High quality. Worth the price compared to some off brand junk. If I'm going to spend my time drilling and aligning I want a high quality product that installs easily with no fuss and no re-do's.

The media could not be loaded. Installs easily. Great size to reach between studs with some spare room for extra flexibility in centering it in the wall.Mounts pretty close to the wall with enough room to reach in if you need to.