

🚗 Stay ahead on the road with effortless tire safety—because your ride deserves the best!
This 4-pack TPMS sensor set operates at 433MHz and comes pre-programmed for Chrysler, Jeep, Dodge, Ram, and Fiat vehicles from 2009 to 2022. Featuring auto-relearn technology, it activates within 20-30 minutes of driving without manual programming. Designed to endure extreme temperatures (-40 to 125℃) and pressures up to 110 PSI, each sensor includes a CR2 battery with a lifespan exceeding 5 years. Backed by a 1-year warranty, these sensors deliver OE-quality performance and reliable tire pressure monitoring for enhanced vehicle safety.










| ASIN | B07VL1ZCMC |
| Batteries | 1 CR2 batteries required. (included) |
| Best Sellers Rank | #5,243 in Automotive ( See Top 100 in Automotive ) #19 in Replacement Tire Pressure Monitoring System (TPMS) Sensors |
| Brand | RENECTIV |
| Customer Reviews | 4.4 4.4 out of 5 stars (982) |
| Date First Available | July 23, 2019 |
| Item Weight | 5.3 ounces |
| Item model number | R6012-4 |
| Manufacturer | 56029398AB |
| Manufacturer Part Number | 56029398AB |
| Model | TPMS SENSOR |
| Package Dimensions | 4.25 x 3.58 x 2.64 inches |
| Voltage | 12 Volts |
O**.
Great value for the money
Great value for the money, they work perfectly on my 2015 Fiat 500 the TPMS don't need to be programmed they link with the others after driving few miles
A**O
Work as Advertised
Worked great with my 2011 Dodge Charger. I had them installed with my new tires. Within 30 seconds of driving, they were fully functional and operating as they should. I highly recommend them.
D**.
Great product
So far I’m really impressed with these. I had new tires put on and a damaged rim replaced. The sensor on that rim did not get recognized by the system on my RAM. I purchased these, broke the bead with my scissor jack under the frame, removed the old one, then tried to put the new one in. Tip, you need a valve stem puller, otherwise nearly impossible. Put the stem installer on, use some dishwashing liquid, stand on the wheel and give a good pull, snaps right in. Filling the 275/60R/20 tire was a little tricky to get the bead seated when it did blew dishwashing liquid everywhere! Sensor was not recognized after installing it, not until I drove at 50 plus mph for around 2 miles. Light went out tire pressure read!
D**W
Worked well.
Just installed. Worked well and priced right.
R**N
buy good
good buy
S**Y
Perfect for 2013 Jeep Wrangler Rubicon
Finally had these installed on my 2013 Jeep wrangler rubicon. Linked to the TPMS system after driving around 20-30 miles. Very happy to have TPMS system working.
R**G
You get what you pay for.
You get what you pay for….Really am rather P-O’d….I have one tire monitor not working and since I knew I would be eventually getting new tires, I figured I would wait to replace all four of them since the car is about ten years old. Replacing one is not a good idea because they may conflict with the reader. So I just bought new tires and had this item sent to me. The agent at the tire shop was nice enough to say they would install these at no additional cost, but before he took them from me, he tested them…The first one failed! The other three worked. GREAT! I know have to buy his monitor valves and instead of $30 for all four, they were $60 each but he let me have them for $30 each….so I just added $90 to my bill because your product did not work, right out of the box.
J**N
Once I got someone to install, it worked great!
I bought my tires at WM. After they were installed, my Dodge Journey's left rear TPMS sensor failed. No big deal, the car's 10 years old, this stuff happens. So I ordered these sensors, got them in and called WM to see about getting it installed. "No problem," the lady at the Auto Center counter said. The charge would be $15, and it wouldn't take but a few minutes. That was Monday. When I went on Tuesday, things had changed. Walmart WOULDN'T install my sensor, no matter what. So I went to my local Jiffy Lube, and since the car was due for an oil change anyway, I paid them $30 to install the sensor. At first, the tech said he couldn't read the sensor with their equipment, but when I explained that it would automatically sync itself eventually, he relented, looked at me like I was kind of crazy, and did the job. All of the information I can find about replacing TPMS sensors on a Journey tells me that new sensors program themselves to the car in about 20 minutes or 15 miles. Well, in this case, it was less than 5 minutes and about 2 miles. The correct pressure came on the screen first, then the warning light and "Service Tire Pressure System" message went away. Now if only I could just convince other shops and techs that these things aren't rocket surgery, maybe more people would go this inexpensive route to keep their TPMS systems operational. I have the other 3 sensors put away and ready when I eventually need them.
S**D
ممتازه وانصح فيها تم تجربتها على دودج تشارجر 2012 وشغاله احسن ما يكون ، للعلم هي تجي طقم اربع قطع وانا ركبت 2 امامي فقط ، بعد التركيب راح تتبرمج من نفسها بعد مشي مسافه 1 كيلو تقريبا 👍🏻👍🏻
H**I
Work perfectly on my Jeep grand cherokee wk2 2015 ,Installed and drive for less than 5Km and its functional as the original one 💯RECOMMENDED💯
T**S
They work perfectly so far got them installed last week but if they don't last as long as they should I'll change the review
R**A
It works perfectly on my Jeep Wrangler 2013.
B**Y
Exactly what I ordered. Fast shipping.
Trustpilot
3 weeks ago
2 weeks ago