AmeriLite for 2009-2018 Dodge Ram 1500 2500 3500 Truck Dual/Quad Projector Models Switchback LED Tube Chrome Replacement Projector Headlight Set - Passenger and Driver Side

2014 Ram 1500 Express, quad style lights from the factory. These were direct plug and play. I did put better bulbs in than what they come with just because I am particular. I stuck with halogen though as I much prefer the color over a bright white LED. Units installed very easy, and adjustment screws lined up correctly on vehicle. Adjusted very easily. Time will tell how well they are sealed, however if I do run into a moisture issue, I will just open the casing and reseal, as these lights do look and function perfectly.

These upgrade headlights fit like a glove! They look like the premium trim level Ram headlamps. I love the fact that all of the lights (turn, marker, DRL) are all LEDs. The signals are bright and the DRL's are nice and bright white. I personally upgraded the bulbs that came in these units to make the up-front LED conversion complete. I highly recommend that for anyone looking to buy these lights. The original halogen lamps are "okay", but if you want to get the most for your efforts, spend the extra $50'ish bucks and order a set of LED high/low replacement lamps for these headlight housings. You can find them her on Amazon. You will NOT be disappointed. 10/10 Highly recommend these Headlights for anyone wanting to upgrade their Ram to better nighttime visibility.

First some background. I have a 09 Ram 1500 with the original headlight housing. I have used true HID, xenon, and LED bulbs in the past and my High and Low beams were one bulb. I was hesitant to order these because I felt some information was left out and there wasn't a lot of pictures or explanations. First picture is off and compared the originals. Second running lights on, I do not have DRL so these only come on as a parking light unless you have DRL. Third is Turn signal, they are not sequential but they are bright. Forth is the beam pattern on low and lastly the beam pattern on high. Install was a breeze. Took all of 15 min. All bolts are 10mm. Remove the top fan cover by popping it off, Then you have access to the bolts for the grill, 4 in total. After the grill removal you have access to the two bolts for the lights. Behind the mud guard is the access for the retaining latch, push up and the lights come right out. Install is the same steps but backwards. The green plug is headlights and the black plug is turn signals. On the driver side you will need to drill an access hole to adjust the beam up and down. No big deal, a hole large enough for a long Phillips head screw driver. Adjusting the beam to proper height is also pretty simple. Find the little divot on the lens and measure to the ground. Find a flat surface and something to measure the beam height, I used a warehouse. Have your headlights 25' from the surface you want to use to adjust your beams. At 25' you want about 2" of drop. So my lights are 3' 1" from the ground, at the wall I dropped them down to 2' 11". This gives you a gradual drop and doesn't effect on coming traffic. Both High and Low beams are bright but do have some hot and cold spots. I am replacing them with slim fit LEDs but I suspect they will have hot and cold spots as well. The beam is nice and straight with the exception of the center of the light beam which is common in projection lights. I do wish there was a horizontal adjustment screw. These come with a hyper flash module to prevent hyper flash and currently have no light out warnings or hyper flash. For the money these are great. The seals look good. The only issue I have with these are the placement of the height adjustment screw (easy fix) and the passenger side plug was slightly damaged upon arrival but I have reached out to the seller to resolve this. I would recommend these to anyone looking to swap out their OEM headlights. For the features and looks the price is on point. I plan on to revisit this within 6 months to a year for a follow up on these lights. Hope all this information helps!

I’ve had them for a year now, and so far I haven’t had any issues with them and they still work and look great.

The lights had two three wire plugs coming out of their light , one fit the high/lowbeam plug fine. The other plug did not fit parking light connection of truck. Would have to splice wires to make it work. Lights look well made. I contacted seller, after a few days , they responded, but didn’t have a solution. They said it was supposed to be to plug in.

Headlights came quickly and packaged for any type of rough transit, which I appreciate! Headlights easy to install, just plug and play, comes with adapter harness which I didn't use it was easier to use old harness. Bulbs it came with seem to be decent quality will replace later on down the road when necessary. I was replacing the front bumper and trim from hitting a deer which is why the before picture is complete front end removal! Tools needed 10mm socket to remove grille and bolts holding in headlights, and a flathead screw driver to pop some clips holding a splash guard over the radiator. You tube has some helpful videos or it comes with instructions. Overall great purchase for price, I had no issues.

Came with extra harnesses, I’m assuming for older models. I have a “2014 Dodge Ram Laramie 4x4.” Easy plug & play. My OEM headlights were about $1000! Everywhere I looked. This was a fantastic alternative. The day-time running LEDs are a nice touch. And allow the truck to stand out a little more. The headlights were packed quite well! Surrounded by foam shaped for the headlights. They both came in their own individual box. Then together in ONE big box. The install was nice, and pretty easy. Just use a YouTube video if you’re having trouble. I give it a 5-star! For the short term usability! I have not seen these headlights 2 years from now. But they look sturdy.

Purchased 5/2022 Lenses are already fogging/ Delaminating outer plastic layer is peeling off, after just 2 years. Company states only 1 year manufacturers warranty. Now for the positive, lights look great and have not had any buildup of moisture inside, easily adjustible for the height of your truck, install isn't hard, however you will get a warning on your dash if you don't currently have LED turn signals. Mine said "Marker light out" every time I turned on a turn signal until updated in trucks computer (I used Alpha OBD)

They are great!! I’ve had them installed on the truck for a week and seems to work good. They look good too!

Liked how shipped the quality of product and fast delivery!

I don't wright a lot of reviews, but I'm really happy with these lights. My factory lights started filling up with water and the driver side turn signal shorted out. Mopar wanted $1,308.00 CND per light to replace so, like all OEM parts I found an aftermarket option. Very easy to install, although they said the they come with H7 (which I switch to LED) they actually came with H11. The clarity is perfect and they look a little different but good. The daytime running lights are still amber but at night it switches to white. Very bright too (with LED). I would recommend!

Bad customer service from the seller!!! And the drivers led light marker/signal light stopped working in 4 months. Would not recommend

The product arrived promptly and was simple to install. They look and function as well as the stock lights that came with the truck when I bought it.