Mophorn Rotary Table 8Inch Horizontal Vertical HV8 Precision 3MT Milling Drilling Machine Vernier Reading Milling Drilling Boring

Fast safe shipping. Very good price to quality ratio. Razor sharp edges everywhere. My diamond files instantly corrected. The machining & table are very accurate.! The action is smooth. Desired Vertical & horizontal positions to secure to any table. Convenient MT2 center bore. Able to add accessories like MT 2 chuck or live center

For the price this is perfect, just make sure you disassemble and clean before you use it.

Great product, but it has issues. Operation is smooth with minimal backlash. T slots are slightly undersized, 13.5 rather than the 14mm in spec. Furnished alignment lugs are over size and did not fit mill t-slots or groves in bottom of the table, requiring some work. Slots in vertical mode are oversized and lugs are loose. When set at zero degrees table T slots do not align with X/Y or at a 45 degree requiring extra work to align work piece. Having layed out these issues I would recommend this rotary table for home shop use

This rotary table can not be beat for the price. The fit and finish were more than acceptable right out of the box. I did have a problem with the micro dial being etched in the wrong direction. Contacted the sellers customer service and they are shipping me a replacement part. Great tool, great price and great customer service.

i suppose for the money it is worth the time. The pamphlet or directions are a joke. I had to adjust the locking mechanism to get it to work. There is a set screw on the underside which you must locate to fix the table disconnect. they could have sent "t"nuts for hold downs. the locating lugs had to be milled to fit my mill.

Excellent! Low backlash, sturdy, exactly what I was looking for. I purchased a 7” 3-jaw chuck and an adapter plate and everything fit well. Note how I had to bolt it to my table. It only has one slot in that config.

I ordered this product unintentionally but thought it was the correct one so I cleaned it up and checked it out getting ready to put it into service on my small mill. After realizing it was 8 inches and not 6 I decided it had to be returned and the company was very cooperative. First class service. In looking the unit over I thought it was well made, operated well, the markings were easy to read. The manual needs to be improved. The photos are poor and the diagram hard to read. The rotary table is massive. It weights about 50 pounds and it’s hard to lift above your waist and onto a mill table. If you are going to take this off and on a lot you may want to think about the weight. I can see this rotary table would be excellent in use because that weight would be useful if it is going to stay mounted. All cast iron so a lot of unwanted vibrations would be removed. The stability would be great. Once the table is locked down I don’t think anything could move it. AD2

Product of high quality, delivered very quickly and packaged well. Very heavy and larger than what my mini mill can handle. I am returning to purchase the smaller 6”, which will work better.

super

Excellent produit. Identique à la description. Très satisfait. MAIS, Ce que je n’ai PAS aimé ce sont les frais de transport supplémentaire coûteux que j’ai dû payer après ma commande… par contre, la livraison a été terriblement rapide… donc, un achat rempli d’insatisfaction mais, qui s’est quand même bien terminé! Très satisfait malgré tout.

Je suis impressionné de sa qualité conception et la belle finition du métal. j’ai vérifié sa précision elle était impeccable.