Corsair Hydro X Series XF Fill/Drain Valve - Chrome (CX-9055020-WW)

Corsair fittings are made by the same people who make Bitspower fittings, so are well made. If you exercise the tap you will notice a click/jolt as it locks into the fully closed position. This is why you have to hold the valve with one hand and crack it open with the other when it is fitted in a rig to stop it putting pressure on the other fittings. It comes with female threads on both ends, so a male to male adaptor is usually required to connect it to a 'T' fitting or radiator drain port. A port blanking fitting is also required to seal the open end of the valve incase it does ever decide to leak.

Really good does exactly what it should , not leak and allow flow with minimal restriction

Perfect fit and great quality. I read some said theirs was leaking a little, I did notice the valve has a notch it seals on when closing. This can need a firm turn to engage it. But mine was totally water tight when shut.

Good product

Updated: I spoke to Corsair and there were 2 issues, not resulting from the product.... I was using it wrong. 1/ The valve MUST be used with an end cap. 2/ I wasn't fully closing the valve. It has to be shut fully 90 degrees (with surprising force needed) to deal. With these things corrected it work just fine. I was wrong.... Original review: Brand new fitted to new tubing it leaks slowly. 100% not fit for purpose. Ive asked Corsair to comment but clearly not up to the job of controlling the sealing of a custom loop. Either QC is poor or the part is fundamentally flawed.

To install this you need extra connecters. I had to use two hard-line connecters and a piece of tube. It also leaks. Only drips but over time it will build up. So I had to buy a Fill port and then only used a small coin cap from it. I'm not sure what a fill port is for. Now the drain port on my loop has cost over £50 with all the Corsair parts that don't fit unless you buy other Corsair parts that are very expensive for what you get. Would probably go with another brand if I where to do it again

It keep the coolant in right up until I powered up the pumps. It was only a slow trickle but it was still a leak. Simple solution was just screw in a blank port/seal.

Usual corsair quality feeling part, its not exactly light etc but it will drip slowly if you dont fit a cap to it, which is a bit anoying. Corsair really needs to make a tap that doesnt let by

Installer dans un pc gamer et watercooling custom, pour la vidange de celle ci Brancher en bas de du réservoir, facile à installer avec tuyau et bouchon en sortie de vanne pour plus de facilité lors du changement de liquide.

Bonne purge, aucune fuite

Super Teil,würde nie wieder eine Custom Wasserkühlung ohne Ablasshahn bauen.

Its work with the rest of my Corsair.

Rating: ⭐⭐⭐⭐⭐ The Corsair Hydro X Series XF Ball Valve in Black is an indispensable component for anyone with a custom water cooling system. Pros: 1. Convenient Shut-Off: The ball valve provides a quick and efficient way to shut off the flow of liquid in your water cooling loop. This is incredibly handy for maintenance, repairs, or any situation where you need to stop the flow of coolant. 2. Durable Build: Corsair is known for its quality, and this ball valve lives up to that reputation. It’s well-constructed, ensuring it can handle the demands of a water cooling system. 3. Easy Installation: Installing the ball valve is straightforward, and it works seamlessly with your existing water cooling components. 4. Black Finish: The black color blends well with most water cooling setups, providing a clean and cohesive look. 5. Peace of Mind: Having a ball valve in your system gives you peace of mind, knowing you can quickly and safely handle maintenance tasks without the risk of spills or leaks. Cons: 1. Price: The convenience and reliability of a ball valve come at a cost, and this component is relatively more expensive compared to other fittings. However, it’s a small price to pay for the benefits it provides. In summary, the Corsair Hydro X Series XF Ball Valve is a must-have for anyone with a custom water cooling setup. It simplifies maintenance and offers peace of mind, making it an invaluable addition to your system. Highly recommended for water cooling enthusiasts!