✨ Light Up Your Life with Style! ✨
The Electronic Spices Round White Color LED Strip is a modern lighting solution featuring 12 LED sources, a sleek crystal design, and USB connectivity. Weighing just 200 grams, this versatile pack of 5 strips is perfect for adding a touch of elegance and vibrancy to any space.
| Colour | MULTI |
| Shape | Round |
| Material | Crystal |
| Light Source Type | LED |
| Shade Material | Crystal |
| Power Source | AC 220v |
| Brand | Electronic Spices |
| Item Weight | 200 Grams |
| Style | Modern |
| Voltage | 4 Volts |
| Number of Light Sources | 12 |
| Manufacturer | Electronic Spices |
| Model number | RWCLSWCSRLPO5 |
| Number of Memory Sticks | 5 |
| Item Weight | 200 g |
| Product Dimensions | 11 x 10 x 2 cm; 200 g |
| Item model number | RWCLSWCSRLPO5 |
| Item Height | 20 Millimeters |
| Item Width | 10 Centimeters |
| Connectivity Technology | USB |
| Wattage | 5 Watts |
| Included Components | white colour led strip |
S**B
A very bright light
Good quality light. Cannot look at them, causes strain as expected with any bright light. Need to use a diffuser of some sort to view. Used two of them to make a DIY emergency light, a 1 watt 2 to 3 ohm resistance in series will be good.
न**े
ठीक है
जो दिखता है उससे छोटे साइज के बल्ब आते है लेकिन जलते ठीक ठाक है
K**N
Price was high
Light brightness was good , but there price was high per piece was 52 rupees too high. Local shop available in full setup light 130 rupees .
V**E
Very good brigtness
This item is very useful for emergency light but it is very costly . Without any components and heat sing, the cost must near about Rs.100 only for 5 Nos.
P**R
Sall size
Small size
Y**H
ElectonicSpices Round LED Strip
Tested with 3.6V Lithium Ion Battery. Red LED is given separately with 4.5 ohms in series. We may not need it. 12 white LEDs are given separately without any current limiting resistor. All 12 LEDs are connected parallel. So works with 3v or above.See the pictures for connections. If connected to 3.6v cell, voltage drops to 3.3v as the 12 LEDs draw 1.07 amps. That means each led draws 90 mA. Too much. So, connected a 1N4007 diode in series with the 3.6v cell. Now the voltage on load is 2.7v and total current is 156 mA. May be 15 mA per LED. Instead of 1N4007 you can use 5 ohms resistor in series with the cell.
V**.
Consume more power but enough brightness
Good product and also bright enough...But consume more power and battery discharge rapidly
H**Y
Cheap but bright
Bright light. Better then expected.
Trustpilot
1 week ago
2 days ago