TeraFlex 3442002 Ball Joints (Premium JK Dana 30/44 Ball Joint Kit)

If you're on the fence about buying these ball joints, let me assure you they're worth their weight in gold! I installed a Teraflex leveling kit for my 2015 Wrangler JKU and immediately started to experience an occasional death wobble. I was told by my wheel alignment shop that my tie rod ends and ball joints checked out fine. Since my ball joints "were fine" I decided to install a Teraflex adjustable track bar front and rear but that didn't fix the issue. I debated new tires because they're 4 years old, but decided to take the cheaper route and bought the Teraflex Ball Joints. I always had a shimmy in the steering wheel at all speeds and now a severe wobble in the 45-52 mph range. As soon as I drove the Jeep down the block with the new ball joints installed I knew right away the problem was fixed. No low speed shimmy no death wobble in the 45-52 mph range. Just a rock solid steering wheel. If you have a wobble in the front end, get off the fence and buy these Teraflex HD Ball Joints....IT'S THE BALL JOINTS!! Also, the photos in the description are the old style joints, I received the newer ball joints with the dual grease Zerks on the lower joint.

Always a good product

All I got were ball joints nothing else how do I get rest of stuff

I am super impressed with these ball joints. Easy to install with great directions and a killer step-by-step YouTube video. Your shopping trip is over. YOU NEED THESE IF YOU HAVE A JEEEP JK !!! I am rolling on 35 inch tires and they are holding up well. I have yet to require adjustment on these. TERA FLEX, PLEASE TAKE MY 💰.

2017 JK with Dana 30. I only have a out 50 miles on them, and I don't know if these are better or worse than other heavy duty ball joints for the JK, but it's like I got a brand new Jeep. Steering is tight, road feel is incredible, no more hop when I hit a rough patch, and no more wandering steering. It is not an easy job. Got a loaner press from a chain auto parts store. Can't use impact tools for the press or you will bend it. If you can find a heavy duty press it will be much easier. Broke hub bolts with breaker bar. That cost me two hub bearings, but I actually feel better having the new parts. I understand now that heating the ears of the hub after applying penetrating oil might allow the 3 bolts to be removed without breaking them. Good luck. Very very much worth the effort.

I paid a lot of money for, what I believed, was a high quality set of heavy duty ball joints for my Jeep, especially with a well known manufacturer, Terra Flex. After just 3 months of having installed this set on my Jeep, one of the lower joints seized completely, leaving my Jeep inoperable. I installed per the manufacturers instructions and greased properly. My stock ball joints lasted almost 140,000 miles. Guess I would expect this "heavy duty" set to last at least as long. Guessed wrong. And to top this, you would think this a likely candidate to be covered under warranty. Not so, surprisingly. After numerous attempts to contact both the Seller and Terra Flex directly to make the warranty claim, neither the seller nor Terra Flex will respond at all. After waiting 3 weeks for resolution, I have had to purchase and install another stock ball joint just to get my only vehicle, daily driver, back on the road. And still, no reply to my multiple attempts and requests for a reply. I would highly recommend to anyone to look elsewhere, for a different product that has a real care for customer support and willing to back their own products, as well as a different seller as both have failed. Good Luck!

Got death wobble? Your buddy tell you running 35's will be fine on your OEM ball joints? Considering these ball joints with others in an oversaturated aftermarket? Let me clear the muddy water for you. Get these. My OEM ball joints were shot, and I wheeled with those same OEM ball joints for entirely too long. After MONTHS of research, talking with a few friends that own shops and JK's- I went with these. My only mistake was not upgrading sooner. Teraflex really impressed me on several levels. Firstly, the packaging is phenomenal. Every ball joint has its place in a custom hard foam fit box, all the serkis fitting for grease and hardware is included. Secondly, they're STOUT! My buddy asked me what I was planning for when he saw them, and I confidently replied "whatever I throw at them." Lastly, THEY'RE ADJUSTABLE. Why's that a big deal, you ask? Because on solid axles, with traditional ball joints, you're stuck with the camber/caster angle the ball joints give you. With these, you can appropriately adjust so that your wheels are perpendicular with the road and parallel to one another. Looking forward to whatever adventures these ball joints see me through. No more death wobble, no more anxiety when driving, and no more issues thanks to Teraflex. Install wasn't bad at all. To see more on these, find my build on Instagram: @Team_NachoJK Go ahead and click the 'buy now' button. You'll thank me later.

Arrived in Australia from USA in 6 days. Great product and fantastic service from Amazon again.

Son de excelente calidad y muy robustas, es precisamente lo que necesito para mi vehículo

Very good quality- do a little research on the tricks to successful install and pay attention to how the zero fittings on bottoms will line up-this will save u lots of headache. I stripped one of my zerk fittings when screwing it in, I called Teraflex customer service and got great service from Jane - nice to see a company stand behind its product These ball joints are definitely an upgrade over stock

Great product, beefy, easy to install, made my driveline vibrations almost disappear (rebalance and alignment took care of the rest). Definitely recommend these ball joints for someone loooking to accommodate a lift and bigger tires over OEM (2.5” lift with heavy 35” mud tires).

Excelente producto sobre todo para corregir camber pues es una solución ideal incluso cuando te pretender cambiar el eje por unos pocos grados de desviación.