Color Primer, Desert Yellow, 400 ml, 13.5 oz - Acrylic Spray Undercoat for Miniature Painting

I feared I'd spray my N scale models with blotches or whatever. That never happened, what happened were easy passes that resulted in a solid coat of primer without clogging any brick detailing Pros: - Very user friendly, even if you rarely ever use spraypaint (like me) - Relatively affordable - Excellent professional quality (even my cheap acrylics adhere to it just fine) - Sprays cleanly without feeling like you have to press down too hard (if you're doing short bursts on small objects, this matters a lot) Cons: - I really wish they'd add a rotating nozzle like newer spraycans have so we can decide how it sprays out Usage: - N Scale Train layouts using Resin prints, with ultra fine detailing - it does great

Why should I pay 3x as much as I would at a hardware store? Well as with most TAP products, the paint quality is the absolute best. I just primed about 20 standard sized minis and barely made a dent. You shouldn't need more than one coat the coverage was so good I only needed to chase around little angles I missed. Like seriously, if you care about quality when painting minis there is no better primer on the market. The addition of essentially a base coat as well saves me plenty of time. I like necrotic flesh as a primer because it's a neutral greenish gray that can really go any direction. Looks somewhat like army sand color. I'll never use another kind of primer

Great product, works very well, little smell, easy to use, good adhesion, many great colors to choose, good size can

It works well and probably covers a 10x10ft to 15x15ft surface. The surface I sprayed was not a perfect square so this is just an estimation based on what I sprayed, so really just a guess. The instructions on the back are clear. You need to spray the paint pretty close to a surface to actually get it on, so it can take a while to spray paint a large surface. The smell was similar to a freshly painted house. Overall the white paint can was good quality, only a little watery if focused to long in one spot.

This stuff is quite great! It gives a solid coat and works well on FDM 3d prints. If you print at ~0.08 layer heights and do light finisheing on top surfaces, this stuff will help cover if you go in coats. Its a deep black. As with all spray paints it is very easy to use. I was worried that because it was so much cheaper than the citadel for example that it worse quality or something but I've loved it. It makes painting easy. The color swatch on top of the can also makes it simple to check the color at a glance.

Worked on a 1/10 cast resin figure, the white primer does not have a super strong covering ability due to the nature of the white color, but gives a very smooth and matte finish to the parts, helps bring out the detail very clearly.

Excellent primer! Goes on easily and doesn't leave chunky spots. Great dark color

Instructions say to insert flathead screwdriver at marked point and twist to break the seal. It then has a flathead screwdriver slot. I inserted the screwdriver in the slot and twisted but instead of opening the lid it punctured the can and primer began spraying uncontrollably all over the place. I covered it as best I could and ran out of the house throwing it into the yard. Our kitchen sink and counter were absolutely covered in this paint which is nearly impossible to remove. I still have it all over my hands after hours of scrubbing. This product goes way beyond being bad and is destructive!

Die beste Grundierung die ich je hatte

Excellent coverage

Fantastico, coprente e adatto come fondo per Paint sia con pennello che aerografo. Usato sia per pla che resina Consigliato

Compro cualquier clase de imprimación oscilando entre 4-8 euros, de buena calidad. El precio me parece levemente exagerado, pero el producto es bastante bueno.

Best spray paint I’ve ever used, barbarism flesh is realistic skin shade, dries almost instantly. I use this as a primer and base coat then seal with mr super clear