Husky Liners Wheel Well Rear Guards | Fits 2019-2026 GMC Sierra 1500 (New Body) | Rear, 2-pc Black - 79071

Great price, great quality, great fit, installation instructions not so great. Here's what I had to do to install them on my 2024 GMC Sierra regular cab standard bed truck: 1. No need to jack up truck or remove tires. 2. Use a T15 Torx driver and a T15 Torx bit with a 1/4" wrench or socket/ratchet. 3. Remove the little factory splash guards at the bottom front and rear of the fender. There are 4 Torx screw, two facing the tire, and two up inside the cavity accessible from below. There is also a hidden plastic clip on the outside face. You can see the prongs inside the fender lip, squeeze them with needlenose pliers and the splash guard pops off. 4. Place the fender liner inside the fender. Make sure you get the Driver's Side and Passenger Side in the right place, they're clearly marked on top. 5. Push it up inside and work it into position until the holes line up and you can insert the plastic push pins. Three along the bottom edge above the tire, one each on the front and rear ends. 6.Reinstall the factory splash guards on top of the bottom edges of the fender liner. The plastic clip should snap back in the hole in the outside face of the fender to hold the splash guard in place. Move the fender liner around a bit until the four holes line up and you can reinstall the four screws. Repeat at the other end of the fender. 7. Repeat on the other side of the truck. 8. Done! Looks much nicer than bare painted sheet metal. Protects against dirt and rocks getting caught up inside the fenders. Easier to clean up, too.

These covers fit perfectly on. my 2022 Sierra Elevation. Placed the passenger side first. All the holes lined up and I removed the lower torc screws but come to realize that when you put the screws back in they realy arent needed to keep these secure. I moved to the driver side and placed the bottom rear side in first and the front went in much quicker. About 20 minutes on the driver side. The look is great, the quality seems good and are definitly thick enough (any thicker and you couldn't work them into the well) Again, if I can do it (60+) you can do it!

Everything I needed was in the box. Easy to install and looks way better with them on. Worth the purchase and very sturdy.

Awesome for the price I paid. I got a damaged box for half the price, so I can't complain about it. The guards were brand new and all the hardware included. I watched the Husky installation video and they said 30 minutes from start to finish, not quite. I struggled for about an hour or more on the driver's side. It was very difficult to get the ends up over the lips of the bottoms. I ended up having to remove the plastic rock guards to give me an extra 1/2" on both ends and still had to use a heat gun to make it more pliable to get it. On the passenger side, I set the guard out in the sun for about an hour and that one went in a lot easier, about 15 - 20 minutes. To remove the rock guards, you will need a T-15 torx driver. If you leave the tires on, you will need a small, short bit and wrench or ratchet to get in there. If you take the tires off, I'm sure it would be easier, but add more work to jack up the truck, remove and reinstall the tires. Overall, for the price I paid, it was worth it and now it's done. If I had paid full price, I may not have kept them.

We were SHOCKED when our new GMC pickup truck didn’t have liners already installed, but these went in easily, look great, and have been in place for months. Great value for the money (ESPECIALLY if you compare with GMC’s price for their option! Mounting holes aligned perfectly, they’ve been fully stable since installation and we couldn’t be happier with our choice.

These fit perfect and look great on my 2024 GMC Sierra 1500 Elevation! No problems with installation and took about 30 minutes. Just make sure that you remove the tires and rims before installing this. It makes installation very easy. At first I tried installing them without reading the directions because it looked easy enough. However, some mounting holes lined up, but some did not, and it looked like I might have had to trim some material. Good thing I read the directions, because one liner is for the passenger side, and the other liner is for the driver's side. I think people that had problems with some of the mounting holes not lining up, and having to trim some of the material, mounted the liners on the wrong sides. Hope this information helps someone!!

A LITTLE HARD TO INSTALL WITH FACTORY INSTALLED MUD FLAPS. JUST TOOK A LITTLE LONGER. THEY LOOK GOOD, HARDWARE INCLUDED, TRUCK LOOKS MUCH BETTER WITH THEM ON NOW.

Le doy una estrella y es demasiado porque hay agujeros que no están bien alineados con lo de la camioneta le escribí para manifestar lo ocurrido y no tienen solución sólo me comentaron es un error de fábrica aparte para ser instalados correctamente hay que quitar las llantas cosa que ellos no dicen en fin me salió más costoso porque tuve que pagar por su instalación y no quedó como debía no lo recomiendo en lo absoluto