LEADTOPS LED Daytime Running light Turn Signal Bulb 24In Switchback Sequential Headlight DRL Strip Flexible Tube Dual Color White Amber/Yellow Angle Eye Neon for Car Motorcyle 2-Pack

Looks and works great nice and bright no issues installing. Wirering nice and easy if you use a fuse piggy back with a 5amp fuse.

DRL looks great on Peugeot 206, had to cut them a bit and seal the ends as well to prevent water going in. To all the people who says they draw additional power, it means they wired them incorrectly and maybe straight to the battery.I recommend putting glue(hot glue gun) on a control box as well just to have a peace of mind. the easiest way to wire them is to buy fuse piggybacks, and wire it up to an unused fuse or to a fuse which only activates when the ignition is on. I wired mine to the fuse that controls inside lighting in the car adding a 5amps fuse to the circuit. the draw from my calculation is 1.3 amps. If you have a PY21W bulb for the turn signal you will have to leave it, without them the car is going to thinks it doesn't have a bulb, and the strip does not provide enough resistance to operate normally so, the turn signal is going to blink really fast like there is no bulb in there. Overall great product and looks good.For the additional improvement I recommend switching the whole headlight to all LED setup.

The media could not be loaded. Love the product. A bit of a trial and error with the installation only because I did it without it a tester. But hell yeah works great.

Unable to use as the sticky side of tape is on the wrong side of light totally wasted my time and my mancanic time with a crap put together by people who just don't look at what they are making. Had to binned it cheers

Bought thees there look strong and it was a good prise to not put them on the car yet but I am over the moon with them better than the last ones I bought

Well, the first point is adhesion. Even though the headlights were cleaned IPA solvent, they don't stick. Luckily for me the gap between the top of the headlights and the hood when closed is perfect for keeping them in place.The second issue I have is with the light output. It appears the white light is brighter on one side of the tape and the orange on the other. I had to choose which was more important and put this side towards the headlights as the other side is more hidden by the hood.So not perfect but I'm still glad I installed them.

Had to add more adhesive even though the area had been cleaned with strong alcohol wipes.

Easy to fit great look on Rav4