FP101 Scratch Filler Primer, Gray – 11 oz. Aerosol Can

Pros: goes on easy, sands well and cleans up very nicely. Works great and has a nice smooth finish Cons: Cost a little more than the cheap stuff but worth it This is my goto stuff for 3d prints. They often have layer lines or imperfections and this covers them well and really easy to sand. I use WAY less sandpaper than with the cheap stuff which alone is worth it.

This is definitely really nice quality primer. Nozzle was an absolute dream, sprayed well and not tiring, and the primer is good quality. Went on well, dried well, and smoothed down well. Used it for a guitar.

I recommend using this filler for any chips you have on ur wheels, before painting, it works very well!

Unfortunately, the can of primer I received had a defective valve. When the spray button was released, the paint would continue to spray for a second or two and sputter. Worked around the problem but would like the product better if the spray valve had functioned properly. Will try another can to see if the sticky valve is not the normal operation. Dried quickly and leveled out very nice and even. Was just able to get 2 coats on about 6 or 7 square feet of surface. Very easy to sand with no clumping. If the next cans spray valve works as it should, I would recommend! 👍

works

great for my yruck

Good

I have a Chevy express van with the paint popping off try a few other products. This one was much easier to use because it did not have a reaction with the paint which is considerably rare and made my life a lot easier.