APT, PVC Marking Tape, Premium Vinyl Safety Marking and Dance Floor Splicing Tape, 6 mil Thick,51mmx30M, Mulit-Color (Orange, 1 Roll)

Great product used for protecting aluminium window prior to plastering. Easily removed when cimplete

Used to seal join on flymo leaf vacuum after repair.

Tape is a good robust product, does the job well in an environment where it is in contact with high footfall and wheeled machinery operating.

I used it for sorting out my tools. In Tins, Plastic, Wood, Aly, Glass. You get the picture. Even odd shapes, curves and ridges. The tape sticks and stays stuck.

This tape was purchased to mark out some lines in the warehouse.It was a cold floor and had just been cleaned (bits of dust still present).It took a long time to cure and was a bit of a pain to adhere to the floor.This tape will work best in summer in a very clean and dry warehouse. Otherwise patience will be needed... or some spray adhesive primer first.

Brought this for my sons construction themed birthday party (lockdown style) it really made all the difference and so strong and durable still down in the garden 3 weeks later lol. Thank you for helping a mummy out as requiring this type of tape during a pandemic was hard as you can imagine!

its what it is, tape!

Useless after 2 month in allotment polytunnel

Es un producto muy práctico ya que trabajó en una escuela y nos ayuda a delimitar los espacios y a marcar los lugares en donde se deben de colocar las personas práctico rápido y fácil

Muy buena cinta, la pusimos hace 2 semanas y ha permanecido aunque ha habido lluvia

Es fácil de pegar y despegar de las superficies, no mancha, no deja residuos, muy contento con esta compra

Purchased this during CoVid to delineate areas or items that were not to be used in the office. The tape adheres well to hard surfaces but can be easily removed if needed. It is durable enough to be cleaned while on the surface without peeling and is mostly water resistant. The colour is eye-catching and quite obvious as a visual signal. NOTE: This tape does not do well on fabric surfaces.

With little kids around I've used this tape for many things over the years in my garage and shop, and generally around the property. I can attest that this stuff is quite tough and if the surface is properly prepared (clean and completely de-greased) it'll adhere almost like paint over time, but it'll come off if you need to [intentionally] remove it. It'll leave a layer of sticky white glue but that's to be expected and comes off with mineral spirits, alcohol, acetone, brake-parts cleaner, etc. (whatever is safe on the surface you're cleaning).Installation tip aside from prep-cleaning the surface, if it's cold I recommend heating the entire surface AND the tape to 90-100 degrees Fahrenheit prior to applying. It seems moderate heat really sets the adhesive into action, and it makes the tape more flexible if you're going around corners or irregular/bumpy/textured surfaces. Work out all air bubbles, keep it warm for a few minutes while you burnish the surface and the stuff will be there until you intentionally remove it, even during long HOT summers in Arizona. Highly recommended.