Round Solid Wood Furniture Legs Sofa Replacement Legs Perfect for Mid-Century Modern/Great IKEA hack for Sofa, Couch, Bed, Coffee Table (6 Inches,Set of 4, Walnut Color)

Adding these legs elevated my 4 and 6 cubicle organizers. They are very sturdy and I love the color. They were easy to install. I loved the look of it so much that I purchased 2 more sets!

I was very impressed with installing two sets of these tonight. I can't speak to long term durability but I can tell you they look spectacular and they were easy to install. I put these on a 5 year old sofa+loveseat from Scandinavian Designs and they totally revitalized the set from meh to WOW! I do have some advice though.You definitely will want an extension/long reach phillips (#2) or you'll destroy the legs with your cordless screwdriver. If you're a DIYer, you prolly already have one. If not, go get one. (This is what I have/like: IRWIN Drill Extension Bit Holder, Quick Change, 12-inch (4935705)). I set my clutch at 8 to keep from stripping the legs as they seemed to start to give way at 12. (Of course your clutch will/may be different but you can compare to IKEA only managing a 4 before tearing loose for me.)The instructions are really terrible but you can sort it out. Definitely you should note that the plate is not drilled to aim the legs out of corners right at 45*. You have to pick whether they go ~20* out or forward. I would highly advise that you mount all of the legs to the plates first, noting the angles very carefully and then labeling them for the corner. Then, attachment of the leg-plate assembly to the furniture is really straightforward. For as well made as these are, it seems like a no-brainer to send decent instructions and stamp the plates. They could pay for the extra effort with all of the zip lock back and extra screws they send. :-)(I'll update this review if at any time in the future I encounter durability issues.)

So we purchased a couch from a reseller that takes damaged or donated furniture. The legs were what was damaged on this particular sofa. After one of the legs broke clean off, I looked on Amazon for some replacements that fit the mid-century look I was going for. I have to say these really did the trick, the legs are definitely solid wood, and surprisingly actually made the sofa *more* stable.I was worried if the screws and plate provided would be enough to hold it, but at least in my case it was. Normally I needed another person to lift the couch up, but with these legs it was more then sturdy enough for me to tilt the couch back up using the legs as leverage.One note I will say, however, is to make your life easier, I would consider using a small drill bit to drill holes into the legs (the holes that are already provided may not be properly drilled all the way) as well as wherever you're screwing the legs into. A power drill can't properly get the screws all the way, so pre-drilling will make it much easier by hand.

They are difficult to install but well worth it for the look. These have a deeper angle than most similar ones sold on Amazon which is beautiful.You will want to power drill to install them and possible an extra set of hands or a vice.The legs are solid hardwood as advertised so they are very very strong. But, the short screws used to connect the plate to the legs are not ideal and don’t seem to be long enough. If you used the provide shorter screws to connect the plate to the legs, be extra careful when flipping the furniture back over. The legs legs will tear from the plate and screws if weight is applied to them sideways (for instance, using the legs as a mechanical fulcrum when flipping). However, this shouldn’t disuade you from purchasing them or other that have a similar attachment design. They are very strong when they are in the correct orientation.They also come with felt sticky pads for the bottoms of each leg to avoid floor scratches which is a nice addition. Do not remove them after initially installing, the wood will strip and they will fall off when you try to put the back on, so I don’t recommend this style if you move a lot. Also, if moving the furniture into a truck or something of the sorts, do not use the legs as handles. Very important as that will make the connection between the plate and legs weak and likely cause the short screws to come out of the wood.

I bought these to give my IKEA toyshelves a little functional facelift. I have a robot vacuum and try to choose furniture with legs so that the vacuum can get underneath all of them. But this toy cubby worked too well for my needs, I couldn’t replace it. I bought a couple of sets of these legs in walnut and added them in an afternoon. Such an easy way to make this shelf more functional and look better too.I did have to provide some of my own screws, since the ones the legs came with were too long and would have punctured through the bottom. I also needed 6 legs instead of 4 to keep the shelf from slumping, but that’s not the legs’ fault. Finally, be sure to drill pilot holes in both the legs themselves and the furniture.As others have said, I was gentle when flipping the piece back over. I would never lever the shelf on these legs to flip it, but standing as it is, it’s very sturdy and stable.

I was repurposing this originally hanging office cabinet that the previous owner had hanging on the wall.These wooden feet are excellent and solid and easy to install.

These were a great addition for a dresser I was updating. I plan on purchasing more for future flips.

Just what I expected

Easy to install, put them on the bottom of the ikea kallax unit and elevates the look a bit

Great furniture legs - good mid century colour and very hard wood. Good price.

N/A

The legs came in on time and they fit perfectly to my coffee table.