GlowShift Tinted 7 Color 30 PSI Turbo Boost/Vacuum Gauge Kit - Includes Mechanical Hose, T-Fitting & Wiring - Multi-Color Display - Black Dial - Smoked Lens - for Car & Truck - 2-1/16" 52mm

Accurate boost gauge has different color settings good brightens its built good and its a bang for your buck

It arrived just as it appears in the photos and it works 100% with its real-time measurements, no defects, recommended

2017 F150 3.5 ecoboost. Works as designed, amazing installation instructions. I did not wire the headlight option yet. You can find + constant 12v several places under the steering wheel. I use the passenger fuse box fuse #1 10 amp fuse with a micro 2 add a circuit fuse tap to get my ignition 12v. That fuse is perfect because it's your cabin dimmer delay. I did not have to remove anything to run the wire back to the drivers side. There is a ground screw right by the obdII port. My boost line went through the firewall grommets. The 2 factory zip ties are frustrating. The Dorman adjustable 1/8-3/8 tee is at all car part store, on the tee trim the 1/8 ends off the section inline with the original boost line. The opening was already 3/8 so you don't want to restrict it. I also got the Dorman variety clam set. I had to cut out about 2 inches of my factory boost line and heat the ends in order to get the tee installed. Save yourself some time and get a 12v circuit tester at Harbor for $3. Quickest way to find + constant and ignition 12v. Pull the side panel, vent and left half of the plactic under the steering wheel, everything is available from there.Good luck. Boost on friends.

There are some mixed reviews of this guage, however my experience is fine. I did not use the crappy vacuum line they provide with the guage and sourced my own from a local parts store. After reading many reviews describing inaccuracy of the guage and not reading boost, I think the vacuum line is the issue. Guage is bright and colors are vivid. For the price it's great. Its worth noting I used a very high end vacuum/ boost guage tester to verify the accuracy of this gauge.

Does the job and looks good.

Running the GlowShift Tinted 7 Color 30 PSI Boost Gauge in my Mazdaspeed3. Works just as expected—readings seem accurate, and the display looks slick. Had to extend the wiring a bit to make it fit my layout, and the included 6 ft vacuum hose wasn’t long enough for my routing, so I swapped in a longer one.Minor adjustments aside, the gauge performs great. If you’re setting up a boost readout and want a clean look with solid functionality, this one’s a safe bet.

Purchased mine back in 2019 and then i put it in my closet and forgot about it. Got it into a car last night and it works perfectly. Can't ask for much more i don't think

Además de poder elegir el color de los números, tiene dos funciones más.Una va cambiando los colores cada dos segundos y la otra los cambia suavemente de forma continua.Y trae accesorios para la instalación.Un lujo 👍👍👍