12 Inch-(2pcs&10pcs&20pcs)

I was working on a PLC project and required some rails rail to fit all of the blocks. The quality was as expected; there's not much that can go wrong with them. The price is fair for what you're getting. Using the included screws, I was able to affix it to the board and everything snapped into place. They weren't flimsy whatsoever and the dimensions were perfect. All in all, I'm very happy with them.

I’m using these for my din rail breakers and scorches on my solar system they work great. Easy to install and fit all din rail devices

They do work perfect as stackable storage bin hangers.

Well made aluminum DIN rail. Easy to cut to length with hacksaw or cutoff wheel. Quick touch up with file or sanding wheel to soften edges. Appreciate seller offering the aluminum version vs the galvanized steel. Granted the aluminum version is more expensive than the steel; but I've had less troubles with the rail getting damaged during install/removal of devices. I haven't had any troubles mounting my DIN power supplies, relay's, etc. I'm very pleased with the purchase and will certainly buy from this seller when need more.

I've used this DIN rail for over a year. Work well. The quality is good. 3D printed objects that clip onto these rails work well.I discovered that 3D printed endcaps (that hold the rails) don't work with these extruded aluminum DIN rails. I wanted to use end caps to tidy up hacksaw cut ends. These rails have ledges on the bottom/backside versus 90 degree square corners. A T vs an L shape. The ledges make the bottom just over 30mm wide (see picture).Steel rails are stamped (bent) making 90 degree rounded corners. Extruded aluminum DIN rail seem to have ledges. There are 3D endcaps that are 'open' and don't enclose the rail and those will work.

These 12" long DIN RAILS turned out to be MUCH stronger and well built compared with the DIN RAILS that come with the mini circuit breakers......very high quality !

As described

Very nice rail, not the cheap stuff good quality