Dual Motor Electric Adjustable Standing for up to 70.8”x31.5” Table Tops, 225 lbs Weight Capacity, Computer Desk for Home and Office (Black Frame only)

Whilst looking for a sit/stand desk I was put off by the majority online having a fairly thin two piece top plus ideally I wanted a custom size to fit so decided to make my own from pine planks that were then stained and sealed. Luckily I stumbled across this perfect solution for the desk legs. I forgot to get pics of the packaging but everything was superbly packed minimizing the risk of damage, the instructions were easy to follow if a little on the small size (I realized later that there is a video online apparently) but assembled it pretty quickly, It took me longer to work out how and where to hide my wiring than it did to put together. I tucked in the control unit rather than have it stuck out so much, I think it looks neater and also prevents accidental knocks. It has up and down buttons to position the desk at the height you prefer and three memory position buttons (very handy) along with the 'S' button to store those settings. My desk is 65.5" x 29" which is a little longer than is recommended for these legs but I made it work. Operation is very smooth, I love the fact that there are 3 memory settings, I have the lowest set so my chair can fit underneath with its arms down and the highest to suit my standing height. I've been using this for two months now and believe it's well worth the money if you want to go down the same route building your own desk or buying a top of your choice. I originally intended to buy an adjustable height desk to put my small refrigerator underneath but this looks so good I've scrapped that idea and gained the extra leg room, I also use it at standing height more often than I thought I would.

With the WFH craze happening due to these unprecedented times, I was looking for a sit/stand desk that wouldn't break the bank. After sifting through dozens of different brands, I decided to give TOPSKY a try, as it had dual motors and had a high value prospect. Packaging: I was extremely surprised how well the frame was packaged. Each piece was protected by thin cellophane wrapping and there even mini wood inserts to separate each piece from one another. I did notice there were fingerprints on a few of the pieces, so it looks like there is some manual intervention before these are completely packaged, but that wasn't enough to negatively impact the overall score of the frame. Installation: If you take a few minutes to understand the logistics of the frame, it makes a lot of sense. You're going to be relying on the diagram pictures from the installation manual, and trying to match the necessary included screws. Mostly everything lined up well, with the exception of one of the legs with the motor. By design, there was NO way a screw was going to fit (the motor is blocking any chance for the screw to be able to securely fit into the hole). All in all, it took a little less than two hours to completely assemble the frame. Table Top: This does NOT come with a table top, if you haven't noticed already. I purchased a BEKANT table top from IKEA with 55" width and it works completely fine. There are already pre-drilled screw holes on the BEKANT, but you can easily ignore them and drill your own holes. Have a power tool ready, and installing a table top only takes a few minutes. I understand TOPSKY is in the middle of procuring some custom-made ones for these frames but they were not available when I ordered the frame. Alternatively, you could buy butcher's block from your local hardware store and give it some treatment as a tabletop. I've also heard good results of using any slab of wood thick/heavy enough and not even needing to screw it in, but I'd have concerns of overall safety (what if someone accidentally knocks it over... goodbye laptop and monitor!) Usability/Sturdiness: I try to stand at least one or two hours in a given work day. The goal for these sit/stand desks are to encourage movement, causing better blood circulation. There isn't a golden number for you to sit and stand, but if you do it enough throughout the day, you're helping your body by changing positions, which also encourages/reminds you to step away from the computer and refocus your mind. The dual motor is VERY quiet. I have the desk on max height most of the time, but the times that I have adjusted the height, it's been extremely quiet and takes less than 30 seconds to go from min-max. The remote control is simple enough to use: Wake it from sleep (press any button), and hold the up/down buttons to your desired height. I'm a little shorter than 6' and the min/max heights work fine for me. Take this in consideration as this is the major difference between the other frames. Sturdiness seems to be good. I have the frame on carpet, so there is bound to be a little bit of a wobble. When I'm standing and typing, there is a minor wobble but not enough to cause any issues. I would assume it would be even more sturdy if I had placed the stands on hardwood. I currently have 1 27" monitor on a C-clamp, and a keyboard and mouse along with a laptop. My table top is 55" wide, and I still have plenty of room on my tabletop. Conclusion: At the given price, you're be hard to find a dual-motor frame at this price point. It does the job, and does it very well. Aside from not being able to screw one part of the frame in, I've had no issues with this frame and am extremely happy with my purchase. I also love that I can essentially upgrade my tabletop at any time, because the frame has an adjustable width. Should I ever need a shorter or wider desk, I have the option to do so and not have to buy new stands. I would recommend this frame for anyone who's shopping on a budget.

I love these adjustable legs! I had found a desk top that I loved (curved top) that fit an odd space and I really wanted adjustable legs. These fit perfectly and were easy to install. Note, they are heavy so build it near the space you want it to go. I also like that they are magnetic so I can hangs things from it. I am 5' 6" and my 6' tall partner can both use it sitting and standing easily. The memory settings are great and it is quiet, I have had for a little over a year and it has shown zero signs of slowing down, very sturdy.

Just got this delivered and put together yesterday. For the actual desktop surface I just used the same piece of wood from my old Ikea desk ($50). For anyone who is reading reviews trying to see if this desk is better than any of the others, I would highly recommend this one because of the dual motors. Most other standing desks in this price range either have no motors or only one motor. With only one motor to lift the desk up and down, you can imagine that it would have to work twice as hard. The first thing I did when I put this desk together was lay on top of it and raise it all the way up. It lifted me (160 lbs) up with no problem and I have no doubts it will hold my setup just fine. The noise the desk makes is pretty quiet. I'm using it in my house so it's not a problem, but if you were installing it in an office I don't think it would annoy anyone else near you. I'm 6'3 and the tallest setting is still too high for me. I would say this would be tall enough for anyone under 6'6ish. At max height it's still very sturdy and way more sturdy than my old cheap Ikea desk. Putting the desk together was very easy and straightforward. I was able to do it solo by myself in less than an hour. If you had someone to help you could get it done in 30 mins easy. Comes with all the tools you need besides a screwdriver. I would recommend using a drill when you screw the legs into your desktop though, because it might be tough to do with a normal screwdriver depending on what your desktop is made of. I'm just using an old Ikea table so it was easy, but if you're using a butcher board or any other thick piece of wood you would probably need a drill. Also comes with extra hardware incase you lose anything while assembling. I also love that they included some cable management things like cable ties and little 3M stickies to keep the cables from hanging down. I got myself some cable management trays from amazon to hold all the cords from my computer, monitor, PlayStation etc. Overall Im really happy with my purchase and would highly recommend to anyone in the market for a standing desk. Ill try to come back in a few months and update this review to see how its holds up over time. Thanks for reading if you got to the end maybe you would press the helpful button so more people can see this review? Thanks!

Owning a standing desk has made a big difference for me and the price point was right for this model. Pros: 1. It raises and lowers smoothly with fine control to specify exactly what height you want. 2. I run a heavy desktop, being fairly close to the 200lb mark. The desk itself can handle 225lbs without issue and works just fine. 3. Side-to-side stability is pretty impressive. Cons: 1. Virtually all standing desks have wobble and rocking issues at different heights, but the rocking (forward and backward) on this one movement can be pretty bad. I keep mine around 40in-42in. As I mentioned above, I have a top heavy desk setup, so lighter setups will not have as much of an issue. 2. Assembly can be a bit of a pain. Overall, if you've never owned a standing desk, this is a solid option for a frame especially for its price. I bought mine last year and it has been a good choice, though I will be upgrading soon. Recommended 4/5.

UPDATE (Mar 8, 2022): The company sent me a different version from what I originally received and it's working flawlessly. I've had this for several months now and it continues to work as expected. I adjust my desk height 3 times a day and this has no issues keeping up with my needs. Huge shout out to this company for continuing to reach out to me to ensure a great experience. Updating to 5 stars for a solid product and a solid company standing by it. UPDATE (Jan 4, 2022): Customer service reached out to me in response to this review, and sent me new module and power supplies. Will update again if it lasts this time. Adding a star back for their willingness to reach out and stand by their product. ORIGINAL: This unit is exactly what I wanted/needed. I've built a custom butcher block countertop desk and wanted to upgrade it to a standing desk. It works great. Really smooth up/down motion. Doesn't even slosh my tea when it moves. Holds monitors, desk, etc all beautifully. Yes I did the math to ensure I was under the suggested max weight and it handles all of it beautifully. Easily programmable settings and easy to install. However: After about 2 months of use (I work from home full time and stand at least half the day), the control module would short in the morning. I would press the setting to go to standing, it would move a couple inches, then die. I would then need to unplug the power to reset the module. Then it works the rest of the day. Annoying, but fine. I reach out to customer service when it starts to get worse (and figure this probably shouldn't be a normal flow anyways). Great customer service. They have me do a couple troubleshooting steps and send them video. In the course of troubleshooting, the whole control module dies. They ship me a new one and ask me to return the broken one for troubleshooting (more on this later). New one arrives in a couple days, swap it out. And it works! Until now about 2 months later, same issue. Why won't I do the same thing again with customer service? Glad you asked! 1. I shouldn't have to go through this every couple months to get a working desk 2. When I did that last time and sent them the return things got weird. They asked me to send it back to them and then invoice them for return shipping. Fine....except that when they reimbursed me via paypal, they made me pay the business fee so I didn't get fully reimbursed and, the kicker, the address they gave me was wrong. So UPS charged me again and returned the broken module back to me.... So all in all, this would be a 5 star product if the control module showed any sort of longevity. Glad to see the company standing behind their product and being willing to ship replacement parts, but having to do it more than once is kind of an issue.

Very impressed ... I just installed this today by attaching it to my current desk table top and it works great! The product is well made and the installation instructions were straight forward.

I am soooooo glad I purchased this one. The dual motor is perfect. I used a glass topper I had already from my desk that I already had. To keep it on I used dampers that go between glass and metal. It has worked perfectly for over one year. I also have a 32-inch monitor mounted on top. That said it is powerful enough to manage it all. It doesn't lag or struggle at all. I got the grey color and love it. For context, the standing desk legs are sturdy. It is heavy when it comes and a bit heavy when putting it together. So be prepared or get assistance if you have access to another person. It can get pretty high. I have a standing desk treadmill that I often use under it, and I still don't get all the way to the top of its potential.