[6 Pack] LK Apple Watch Screen Protector, Compatible with Apple Watch Series 6/5/4 SE 44mm, Self-Healing TPU Film x 6, Super Thin, HD, Case-Friendly Design, Bubble-Free

After recently getting my first Apple Watch, I was flooded with all of the possible screen protectors and cases that were available. Not wanting to waste money on trying 59 different products, everything seemed to point back to LK.Package came in super quick of course and everything was individually wrapped and organized which made me super happy. The video directs were super easy to follow.Screen protector went on super smooth and fast. Having the multi step peels seemed annoying in the video, but made application super smooth. The first attempt went perfect and without bubbles.After the screen protector was applied, it nearly disappeared. The only way you can tell is if you slide your finger along the edge and you can slightly feel the edge.Scratches show up slightly but disappeared after a short time.Super glad I don’t have to worry about scratches now.-EDIT-After extended use, I MIGHT get one week from each screen protector. It’s not like I’m doing rough work, the screen protectors start peeling or totally rip. Not sure what else out there to get but I’ve already burnt through all of the screen protectors that came with the first pack.

I purchased this screen protector for my Series 3, and let me tell you, I have thought about how nice it was the entire time. I also couldn’t believe how frustrating it was to put on when I bought it! I went through, literally, all 6 of them, trying to get it right on that watch.Every now and then, it crosses my mind as to what I got wrong with that screen protector. It goes on so well, that it’s almost invisible, but what a hassle!So now I got the new Series 6. I have bought 2 other screen protectors, and none of them satisfied me. This brand came up on my search again, and I said I was going to try it again, hey it’s 10 bucks, right?I now have an understanding on how to put it on after carefully watching the video. My mind rushes through things...so this time, I turned everything off. No distractions, and really watched it. This screen protector goes on differently than any other screen protector. Follow the steps to the letter. I nailed it! I’d show you, but it’s so good you can’t see it.Great product. But don’t try and figure it out. Watch the video. Kind of had a little flaw due to the smoothing the edges part at the end, so once again, follow the directions. All the way! I literally did the second one in a minute.I’ll never forget how to put this on again. Ever. Now I can do it easily. Some thing you never forget. This is one of them 😂

This is the second set I've purchased - the first set was purchased for the Series 3 watch. I purchased them again because they work and because I have a realistic expectation of what they are and what they do.The are barely noticeable and I don't notice and loss of sensitivity whatsoever. Protection is good regarding scratches. However, once you scratch the screen protector, you can easily damage the protector itself or peel the side a little, meaning it will look a little ugly until you replace it. Think of it like one of those films that covers the display on an electronic device when you first open the package.So my advice - don't think of having 6 because you have 6 tries to get it on right - be ok with your application even if it's not perfect, then keep the extra 5 to use every few weeks/months depending on how you use your watch.

I've used so many screen protectors and finally came across these a year or more ago. Yes they're thinner than the others. Yes you may have to replace them more frequently. However, if a corner lifts it's not always time to replace, you can just push it down and smooth it out. The thicker ones have so much tension pulling them up that once it comes up it never goes down.Also the installation for these is perfect every time. It's a little complicated at first but once you get it down you'll have a perfect install in no time.They look so good it's hard to tell it's on!

Update: These screen protectors started bubbling within 2 days. I installed 3 more to find that they began to bubble within a day. I have reached out to the company but have not received any return correspondence.Original Review:I am very impressed with this product. The screen protectors were easy to install and took less than 5 minutes to perfectly install the protectors. I suggest watching the installation instructions. These are quality protectors that do not interfere with the touch screen at all. The protectors are very clear as I can barely tell that they are installed on the watch. These come in a pack of 6 so I think it is an excellent value. I highly recommend this product.

Just received this today. I installed the protector as per the instructional video which was well explained... all was well until I realized that no matter how many times I tried the protector continued to peel from the corner leaving air bubbles and trapping small dust.. in the end, they were not usable.. like I said, poor product... not sure how other people got theirs to stay but these simply did not.

I ordered the LK screen protector because I used it on my Apple Watch series 3 42 mm And it was amazing very great quality and did the job right. The issue I’m having with this is that it does not cover the whole screen like it does on my 42 mm when I pulled out one of the old ones for my 42 mm and compared it it is exactly the same size. I don’t mind spending the money to get a product that does what it says but I hate spending money or giving money To a company who instead of updating their products just re-purpose but they already have very disappointed with them.Again the product does what it says for the older version watches but very disappointed that it does not cover the full screen on my new Series 6,that is my only complaint

Edit 2: So, been a couple of weeks, and the 2nd one I applied is still stuck down ok with no lifting. So, giving it another star.Edit: So, the first one lasted a week before the whole of the bottom was lifted up. Took it off, and tried another one. Gave the watch a good clean, and then applied, and made sure I pressed down on the corners to make sure it was stuck. Also this time I did it just before bed, and I put the watch straight onto its charger and left it overnight. In the morning the corners were still stuck down, and after having worn the watch for several days they are still stuck down.I have increased the rating by one star at the moment as it does look nice once on, so will see how this ones goes, and will review again in a few weeks.Original:Get a lot in the box to help with the install: wipes, cloth, foam pad to place watch on, card to help apply, and all that meant the protector went on well.However within minutes the protector started to lift at the corners. I pressed down, and waited a while, but as soon as I removed pressure it started to lift. I even tried to press down just before bed while watch was on charger (so it didn't rub against and clothes etc) but in the morning it had still lifted.It just doesn't seem sticky enough to hold at the corners, also, it could maybe be a bit bigger which would then maybe allow a bit more grip on the corners. It does say "Max Coverage", but then it also says "Case Friendly" so maybe there's a bit of room around the edge for a case, but then it can't be "Max Coverage".I have had other protectors for my Apple series 2 watch, and yes they start to lift at the corners, but not until a good few months.Yes, you get 6 in a pack, but at this rate they would be used up within a week or 2.

These come in a pack of 6 for £6.99 which would appear to be good value, especially as the box says that they have a lifetime guarantee. However, if they last a lifetime why do you need six?There is a very clever and almost foolproof fitting system and they include 6 lots of everything you need. The screen protector covers about half of the curved part of the screen, which is handy but unfortunately this is also its Achilles heel as the edges don't stick that well. My first one rolled back and became useless after 2 weeks. My second one has bubbled up a couple of times but luckily has gone down again (there were lots of bubbles on the edge bits when I first fitted them but they go away after a day or so).Looking straight on at the watch the screen is essentially invisible. Unfortunately, looked at from an angle the surface has ripples on it which is somewhat annoying (see photo). This is visible with the screen on too. When I contacted support about the issues I had faced they send me a replacement pack.In absolute terms they are probably 3 star but there seems to be a shortage of 'invisible' screen protectors for the Apple Watch and these are certainly great value so I'll give it 4. On my Pebble watch I used GadgetWraps which I found to be excellent so will probably go back to them if the ones they do for the Apple Watch 4 fit mine.

UPDATE-The third protector lasted half a day before the edge started lifting. These just aren’t fit for purpose.Don't be fooled by the 'free' watch band offer. The site just says 'order not recognised' when you enter your order number.There's an adhesive ring in the pack that helps hold the watch still. There's a clear video on how to fit the film but I still wasted one completely, and had a second that had marks on the film. The third has gone on better, after the second peeled off by itself. So I've use three protectors in 2 days. I think it may just be that film screen protectors don't work well with the Apple Watch?

It's a shame as when first applied its perfect, I didn't want to get the other thicker more prominent looking screen protectors as I just wanted scratch protection for the screen while being unnoticeable. It does the job for the first 10 minutes or so before the corners start unpeeling. If you are lucky to catch this happening you can stick them down again but every time for me it will eventually unpeel and once dust gets under its game over. I went through 3 in 1 day (1of those for complete transparency was admittedly my fault for not following the instructions carefully). I'm down to 2 left and keeping the current one on (in pictures) until my OCD is unbearable and I can't resist the urge to peel it off and start again. I will probably have to buy a new one soon and do more research. If the seller has any pointers or advice with what I can do maybe I can salvage the last 2.

I am very rarely the type to give a bad review on a product but this Awful product. I recently purchased these for my Apple Watch series 6 and the application was straight forward although it took me several attempts to stick down. However the screens move quite a bit and do not stay stuck down on the sides. This means that they lift off the sides and corners. In the end I just took it off and now I have nothing.Waste of money