Mount-It! Triple Monitor Mount | 3 Computer Screen Desk Stand with Clamp and Grommet Base Fits Up to 24, 27, 32 Displays | Universal VESA Pattern 75x75 and 100x100

Great monitor stand for the money. High quality, sturdy. Easy to install - in fact I was able to do it myself while holding up the monitors at the same time - that is huge...usually you need help. Great product, would buy again and again - I keep recommending the dual and triple monitor stand to friends and family for work and pleasure - A+ highly recommend.

The product claims it will support triple 32 inch displays they will not work if you want them set up normally. There is no set up instructions for this item in the packaging the one monitor I did manage to mount refuses to stay level it slumps down there is no way to adjust the tension so it will stay up. The monitors I am using are not even close to the weight limit of that is claimed. I am using 32 inch Onn TVS which weigh less then 8lbs each so less then 1/2 what they claim the stand will hold per display which is 17.6 lbs EACH.

This mount worked well. The arms are long enough that they could probably hold 3 30” monitors without issue. I ended up cutting 2 of the arms to a shorter length for my monitor sizes to keep the arms from projecting back as my desk is against the wall. The adjustment screws do take a lot of fiddling with to get them just right, but if you don’t move your monitors they work get once dialed in.

I like this monitor stand, but the middle monitor mount is quite loose and we haven't figured out how to tighten it so that monitor is not really able to angle how I like.

I had high hopes for this mount, having used mounts from Mount It! before. If you need a 3 monitor mount, keep looking; this one isn't the one you're looking for.Good:- Cheap- Holds monitors- Supports monitors at least as big as 27"Bad:- Adjustment bolts were stripped out from the factory (how do you even strip out hex head bolts?)- No 2 monitors are of even height- Despite being tight already, hinges flap wildly making it hard to get the monitors to stay where you want them- Half the joints were assembled upside down on the one I got- Cable management things aren't big enough to hold cables for 3 monitors

Great value and a very robust monitor mounting solution. This is the 4th or 5th unit I've purchased.

works great on my desk

The arms do not extend out straight as shown in the demonstration video or pictures. In use the arms slump 1-2 inches below the middle with a monitor they should be able to hold easily. It makes the whole display look quite lopsided.The included instructions on how to assemble the stand are also very bad. Just use the video on the selling page if you plan on getting it.I would avoid and just find another stand that isn't such bad quality

After all the trouble of putting this mount together and mounting it on my desk I had to remove it. It would not hold my 28" monitors. Once I had the two outside monitors on, there was insufficient room for the middle monitor. And, the center bar is not high enough to hold the monitors up high enough to be comfortable viewing while sitting or standing at the desk.

El artículo me llegó bien y es funcional. Creo que es un balance entre peso - resistencia. Un poco más rígido sería ideal.El motivo de mi título es porque es SUPER importante que se aseguren que la mesa donde lo coloquen sea bastante resistente. Debido al diseño del soporte, los monitores NO están equilibrados, sino que el peso los carga hacia "adelante" y entonces el poste principal debe quedar RIGIDAMENTE anclado.En mi caso, lo quise anclar a una mesa rubbermaid plástica, que tiene unas trabes metálicas. Sin embargo, ¡el peso combinado de 3 monitores 24in fue suficiente para que la mesa de doblara!Lo resolví colocando el poste en una esquina de la mesa y agregando un pedazo de madera gruesa para incrementarle rigidez a la mesa. Ya casi no se tuerce hacia adelante.Debo reconocer que es muy práctico y me gusta que puedes "conducir" los cables con grapas plásticas que se fijan en los postes (no son muy fuertes, pero suficiente).Nota: lo fijé usando los tornillos tipo prensa. Hay otra manera de fijarlo, si tu mesa tiene un agujero pasado...

So, this would be a great setup for smaller, lighter screens. I have medium sized, 30" screens. The outside arms keep sloping forward, no matter how much I tighten them. Oh well, at least the screens aren't sitting on the desk...

Cuando lo estaba apretando se rompió, no me quiero imaginar que hubiera pasado con mis pantallas ya puestas. Obvio voy a intentar pedir rembolso de un producto que puede llegarte dañado y aún peor llegar a dañarte tus pantallas. Tengan cuidado.