Chemical Guys Acc_130 Professional Chemical Resistant Heavy Duty Bottle and Sprayer, 32 oz

I used these for storing concentrated borax solution for my laser and they have no problems after months of use. The standard sprayers die within days from internal corrosion. These sprayers don't leak; they are durable; and they are a good size for my needs.

Only lasted three months with Lysol bleach. Nozzle broke off.

For the love of Mike (though I’ve never been entirely clear who Mike is or why he’s so lovable), how hard can it possibly be to make a spray bottle that works? Do you have to get a triple Ph.D. in physics, mechanical engineering, and theoretical calculus, followed by eleven years of intensive postgraduate study in Fundamentals of Spray Bottle Technology, before you can even make your first attempt at designing a spray bottle that doesn’t dribble all over the user’s hand? Are the nozzle adjusters of spray bottles that work made from some element so rare it hasn’t been discovered yet, and the only way to get it is through secret negotiations with time-traveling aliens from the future?Okay, okay. I will take a deep breath and describe this spray bottle calmly. It’s crummy. To start with, it won’t spray at all until you prime it by repeatedly squeezing the trigger. And then if you tilt it out of the vertical, it stops spraying after a few squeezes, and you have to hold it exactly, rigidly vertical and prime it again. Meanwhile, the nozzle adjuster doesn’t work. The only setting that halfway works is Stream, and it’s a pretty feeble stream. Dial the adjuster down toward Mist and all you get is a feebler stream with liquid leaking out the nozzle and dribbling down your hand—causing you to tilt the bottle to keep some of the mess off your hand, causing the bottle to stop spraying. On top of that, the cap has the habit of unscrewing itself just slightly with every squeeze of the trigger, so if you’re paying attention, you have to stop every few minutes to tighten the cap, and if you’re not paying attention, a whole bottle of cleaning solution will fall out of your hand onto your foot and splatter over a quarter-mile radius.Okay, okay. So I kind of stopped being calm there.Sigh. Eight dollars down the drain for a spray bottle that doesn’t even work as well as the bottles that three-dollar store-brand spray cleaners come in, and the extreme crumminess of those bottles is what drove me to spend eight dollars on a spray bottle in the first place. In a word: Grrrrrr. Also, if there are any time-traveling aliens from the future reading this, I’d like to have a word with you.

I mix vinegar and water to kill weeds. This spray bottle has held up longer than other spray bottles.

I use mine for a bleach/water mixture. It works like a charm for a couple of months then starts getting hard to use then won't spray at all. I buy it specifically for that reason, and it should, imho, last a lot longer. It's better than the average spray bottle by a mile, but since it's advertised as "Acid Resistant" it seems like it should do well with bleach for at least several months. Not so much as this is the third one I've purchased in a year.Fortunately they aren't very expensive, but still....

The Chemical Guys spray bottle is by far the best spray bottle you can buy. It is very high quality. The spray trigger is very consistent in the volume of liquid that it sprays out with each pull of the trigger. The mist setting produces a mist that covers a much larger surface area than any other spray bottle I’ve purchased and used.

I used this spray bottle with Mother's Foaming Wheel and Tire Cleaner.Works fine, but could use improvements. Three stars because it functions as advertised, but lacks the ability to seal for storage.PROS: The bottle holds a good amount of product. The trigger doesn't take too much effort to use and won't overly tire your hand. Dispenses a good amount of product per pull. Foaming is acceptable, but you have to depress the trigger quickly and for the full throw.CONS: Dispense nozzle/flow isn't adjustable and doesn't close. If you keep product in the bottle, it will come out through the nozzle during storage. Therefore, you'll probably have to empty your product everytime. Also a little bit messy to use due to dispense amount and having to use full throw of the trigger for foam. If you don't use a full throw, foaming isn't effective. Finally, for some reason, the draw tube is about 1 inch short of reaching the bottom of the bottle.

This spray bottle has a comfortable grip handle at the top which makes it easy to carry around when you’re cleaning your home or vehicle.Using this sprayer could not be easier - all you have to do is fill up the bottle with your chosen soap solution, screw on the sprayer head, press down on the trigger, and adjust the nozzle to get the desired amount of foam. The foam produced by this sprayer is thick and creamy so it clings nicely to surfaces for a thorough clean.In addition to its ease of use, this spray bottle also comes with several extra features that make it even more convenient. There are adjustable settings on the nozzle so you can control how much foam you need for different jobs.