Premium Battery Terminal Connectors for Nissan, Positive and Negative 1 pair, Good Contact, Corrosion Resistance, Fits For 243407F000 243407F001

Muy buen producto

These were jus what I needed for my Kubota RTV. Modifications to the existing cables are required because Kubota has proprietary cables that they sell with the battery terminals attached. Rather than cutting off the old terminals and crimping on new lug terminals, you can bend and cut metal off the old terminals making lugs out of the old terminals which are most likely broken if you are replacing them. They will then fit in these new battery terminals in the same manor that they were on the old terminals. The holes in the old terminals will be too small for the bolt provided for cables on the new terminals but they fit nicely on the bolt that squeezes the terminal together which is how Kubota manufactured their cables to start with.

works well price is right

Thats was i expected. Very good quality!

They are beautiful and very handy, BUT I think there's a problem with the metal type on a battery. I bought and put on 2 sets on some batteries in my camper. One week later, we needed to remove them to do other work and found that the aluminum nuts on the terminal tightener would not budge. I finally locked it into a vise and wrenched off the nut. You could see the corrosion growing after only a few days. All 4 terminals were the same way with little bits of corrosion growing in other parts of the terminals. I even used the felt washers that came with them supposedly to stop corrosion. These were brand new auto batteries too.I really liked these initially because they gave so much flexibility to be able to attach other wires. I didn't think about the corrosion factor due to having the wrong type of metal. It's a fact that certain metals will automatically corrode when put in the wrong place on electrical components. I don't know what it's called but it happens. Bummer cause I liked them but they are no good if you cant remove them or adjust them.We didn't have any problems once we put on different terminals that were lead.

Nice stainless and anti-corrosion felt rings.

I did install it and I suppose it will last about as long as any battery connector. One issue is that it won't fit as supplied. Both the positive and negative connectors have plastic that goes under it and contacts the battery top or the felt protector that is also supplied. The problem is that the way the plastic is attached to the connector makes it hard to impossible to tighten the connector to the terminal as it prevents enough compression around the terminal. And because of the added height of the plastic it also prevents you from pushing it as far down on the terminal as it needs to be for a tight fit if you also use the felt protector. I solved this problem by cutting the plastic where it is held by the tightening screw and pushing it out of the way. You can see it hanging down in the picture to the left of the battery.Now, if I had not used the felt under the connector it would have fit but still caused problem in the tightening screw, but using both the felt and attached plastic used too much room.A very small problem but the design should have accounted for it.Secondary problem is that the bolt used to tighten to the terminal will slip as you tighten it. The head of the bolt is supposed to be held by the connector not to turn as the nut is tightened but it turns anyway. Just means I have to use a second wrench to hold it.

Quality terminals. They look much better than my old corroded ones.