Meza Mount-Set of 2 Hotas Desk Mount for The Flight Sim Joystick Mount Compatible with Thrustmaster Warthog/WinWing Orion 2,Adjustable height and position Hotas Mount,Flight Joystick Mount

These mounts are solid and don't budge at all once clamped to the desk. Heavy-duty materials with perfect tolerances. Nothing wiggles even the smallest amount. Every possible adjustment point you might want is present, and the track system provides a quick way to dial in the position.They come nearly fully assembled with additional nuts and bolts and hex wrenches to apply them. The locking mechanism is smooth, and the nylon bumper and rubber desk protection are well-crafted.I mounted Winwing's Orion 2 F-18 HOTAS. It wasn't listed as compatible and nearly worked out of the box but for the supplied bolts being a smidge too long and the gear sliding when attached. Adding a small washer to each bolt was all it took to adjust to a perfect bite under even the hardest stick pulls. If Meza included a handful of washers they could justifiably call it fully compatible with Winwing's Orion 2 line.A well-crafted piece of equipment at a fair price. Packaging was first-class as well.

Excellent product. Mount is solid and secure. Quality build and universal material used. Highly configurable for various situations.

I recently purchased the Meza Mount - Set of 2 Heavy Duty Hotas Desk Mounts, and I have been mostly impressed with the quality of the product. The shipping was prompt, which is always appreciated. As for the mounts themselves, they are a testament to good engineering and design. The build quality is top-notch, featuring clean lines and a sturdy aluminum construction that exudes durability.Installation was pretty straightforward, thanks to the included manual. The clamps are well-crafted, providing a secure and seemingly immovable grip on my desk. I was particularly delighted to find that the mounts fit my WinWing Orion 2 Hotas Max like a glove, which is a huge plus.However, it wasn’t a perfect experience. I encountered a snag with the provided screws for the joystick base—they were too long. And frustratingly, the screws that came with my joystick were too short. It was fortunate that I had a couple of spare screws from my throttle base that fit perfectly. So, future buyers, take note: you may need to find screws of an intermediate length.Additionally, the design for securing the throttle base involves an inverted screw-up approach with a nut, which can be a bit tricky due to the limited clearance. This wasn’t a deal-breaker but is something to keep in mind during assembly.Overall, despite the slight inconvenience with the screws, the Meza Mounts have added a level of professionalism and solidity to my flight sim setup that I didn’t even know I was missing. They are a fantastic choice for any serious flight sim enthusiast, provided you’re prepared to possibly supply a couple of your own screws.

I bought these to mount my WinWing Orion II throttle and joystick base. The clamps are very sturdy, and the metal is all of excellent quality and machined nicely with wounded and beveled edges. There are ZERO instructions, which would be helpful in sorting out which nuts and bolts go where. All screws and hardware are good quality and the correct sizes and thread patterns to fit the intended HOTAS system. They even give you a few spares/extras in case you lose something - always a nice touch from a manufacturer. I only note two opportunities for design improvement: First, the clamps are very strong, quick to attach and release and easily adjusted for a wide range of desk thicknesses. I do wish there was a little more space between the clamp and the base to allow the clamp to go behind the small lip on the front of the desk. Most desks aren't just a solid slab of wood; many have a lip on the front edge. Mine is only 3/4" deep and the clamp can't clear it - it clamps to the lip instead of the horizontal desk surface behind it. I ended up gluing a 3/4" thick strip of plywood behind the lip to allow the clamp to mate to a flush surface. It was still reasonably solid before I did that - not a deal breaker. My second observation is the mounting plate for the joystick base is very long Even adjusted as close to the desk as possible, the plate positions the joystick much closer to your body than it needs to be, forcing me to sit farther from my desk and screen than I would like. The plate could easily be 2" shorter and still have plenty of clearance for the joystick to push forward to its limit and not have your knuckles touch the mounting rail. Especially when mounting a throttle base, it would be nice to position the stick farther forward to more closely match the relative positions in the actual cockpit. There would still be plenty of room to adjust the position closer to the user, making the whole thing more versatile. Overall, very impressed with the build quality and would buy again.

I don't take the time to write many reviews but wanted to share that this desk mount setup was a game changer for me. The product quality is top-notch and easy to setup. I saw some reviews about this but to me the instructions are totally clear and easy to follow. The mounts work exceptionally well and once installed on the desk they hold firm and significantly enhance the immersion experience of DCS. I finally have my joystick front and center and even notice that my Thrustmaster Joystick works and feels better on the mount than it does on it's own heavy duty stand. The hardware also fits the Thrustmaster Warthog perfectly. Highly recommend.