Trans-Dapt Performance1120 Single Filter Relocation Kit

The kit worked perfect in my 2003 Chevrolet Suburban 4x4 Z71. I bought a new aluminum radiator that came with a transmission oil cooler & an engine oil cooler. It worked perfect for with the kit.

just installed it last night so this review is strictly on the install and product quality.The good:I was able to relocate the oil filter to the front of the engine by the air filter on my GMC Envoy. The included hoses are long enough to achieve this. The Block adapter fit perfectly on my SUV.The bad:The hoses are easily kinked. If you need to turn up 90 degrees to mount the filter above in your engine compartment you have to play with the hoses to achieve the correct balance between length and tightness of the turn. In my case I lost 1/2 foot on the 90 degree turn. Btw, you also need to avoid sharp edges and hot surfaces.Your car's original oil filter will probably not fit. It calls for ph8a fram filter

Fits my truck fine. The standard hoses run over the skid plate and the filter block holds in place with 1/4-20 screws that I drilled and tapped into the drivers side frame right behind the front bumper. I just have to be careful to not park or drive over very tall curbs. No more oil on the frame of the truck during oil changes. Yeaaaa.

It works properly, except that the included lines really need to be longer if you want to mount the filter in a convenient place. I am using it with an oil cooler, and was able to use only one line, from the filter mount to the cooler. I couldn't find a place to mount the filter block close enough to the engine filter boss to use the other hose.