HoneywellRemote Indoor Sensor C7189U1005

Worked perfectly

This wired remote tells the VisionPro thermostat the temp, in any indoor space, where the remote is mounted. It does not sense humidity. I put one in my master bedroom, because the thermostat was in a non-related hallway (not even served by the same heat pump). You'll need to program your thermostat to use the wired remote temp sensor. If you don't have the installer pamphlet that came with your thermostat, search the model number online and find a manual for installer programming. The code to enter programming is on the back of the thermostat, when you remove it from the sub-base. There will be a sticker with four digits. If you can't run a two conductor cable from your thermostat to this remote temp sensor, you can buy a wireless indoor remote temp sensor, instead. I also recommend adding a wireless outdoor temp sensor. With an outdoor sensor, you can program your thermostat(s) to lock out electric or other aux heat above a certain outside temperature. That's the only way you can prevent aux heat from turning on, when you raise the temperature setting manually by 2° or more. A single outside wireless temp sensor can be associated with multiple VisionPro thermostats in a house. For any of the wireless accessories, make sure your VisionPro has the RedLink feature. (Most do.)

Good Precise product

We have these all over our campus on Ecobee thermostats and they work well. We only have to adjust the sensor if the wire run is long. I took off a star because once they are mounted to the wall, the cover seems to come loose with very little pressure—even when we barely tighten the mounting screws.

I ordered these for one of my customers after going to my wholesale heating supplier and was told it would be a month to get the wired sensors. I ordered these on a Tuesday and I had them in my hand That Friday before noon and pretty much the same price more or less. I'm happy